Unit of competency Outline

Information current as of
20/10/2026 5:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set and adjust automotive production machine tools

Set and adjust automotive production machine tools

Unit of competency
National Code
AUMFTA003
State Code
WH937
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Original Release Date
10/01/2014
Nominal Hours
30
Field of Education
030717 - Plant And Machine Operations
Description
This unit describes the performance outcomes required to set and adjust production machine tools.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1. Plan and prepare
  • 1.1 Job instructions and quality requirements are located and confirmed with appropriate personnel
  • 1.2 Tools and equipment required for the job are selected and checked for faults and correct operation
  • 1.3 Materials required to complete the job are identified and prepared
2. Select and check machining tools
  • 2.1 Machining tools are selected according to the machine’s maintenance schedule and specifications
  • 2.2 Machining tools are inspected and tested for compliance with specifications
  • 2.3 Out-of-specification tools are processed for repair or disposal according to workplace procedures
  • 2.4 Machining tools are cleaned, prepared for use, and protected for transit
3. Remove and replace machining tools
  • 3.1 Required location for the machining tools is checked and confirmed against machine specifications
  • 3.2 Machine is made safe according to work health and safety (WHS) requirements and workplace procedures prior to commencing work
  • 3.3 Machining tools are located and removed, and replacement machining tools are installed and set to machine specifications
  • 3.4 Machine safety guards are checked for correct fitting according to machine specifications
  • 3.5 Test runs are conducted according to WHS requirements and workplaceprocedures, and sample products are checked
4. Maintain machining tools and stock levels
  • 4.1 Machining tools are maintained according to workplace procedures
  • 4.2 Stock levels of machining tools are reviewed and action taken to avoid stock-out situations
  • 4.3 Stock levels of consumables are maintained to support continuity of operations
5. Complete work processes
  • 5.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures
  • 5.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures
  • 5.3 Workplace documentation is completed according to workplace procedures
No information
No information
No information