Unit of competency Outline

Date retreived
22/07/2026 11:13 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for basic carton folding and gluing

Set up machine for basic carton folding and gluing

Unit of competency
National Code
ICPCBF306
State Code
AUP29
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
40
Description
This unit describes the skills and knowledge required to set up and adjust a machine for basic carton folding and gluing to ensure the finished product is in accordance with specifications and requirements.It applies to individuals who work under direct supervision but have limited responsibility with preparing materials, equipment and machinery to ensure the production process is maintained.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Set up carton blank transportation system
  • 1.1 Feeder is set up and adjusted according to job specifications
  • 1.2 Carton blank pick-up and transportation system is set up and adjusted according to job specifications
  • 1.3 Transfer systems are set up and adjusted according to job specifications
2. Set up carton delivery system
  • 2.1 Delivery is set up and adjusted according to job specifications
  • 2.2 Substrate is removed from process according to job specifications
3. Set up machine for basic folding and gluing (single/continuous)
  • 3.1 Folding units are set up and adjusted according to job specifications
  • 3.2 Folding rollers/belts/rails are set up and adjusted according to job specifications
  • 3.3 Gluing system is set up and adjusted according to job specifications using either glue wheel or one glue head
4. Conduct sample run
  • 4.1 Material to be used for sample is organised correctly
  • 4.2 Machine is set up and operated according to Work Health and Safety (WHS) requirements, manufacturer’s specifications and enterprise procedures to produce a specified sample
  • 4.3 Slitters are monitored and adjusted according to job specifications
  • 4.4 Sample is visually inspected and/or tested for accuracy of folds, fibre tear, opening force, fluff and glue placement according to enterprise procedures
5. Readjust settings
  • 5.1 Results are interpreted to determine adjustment requirements
  • 5.2 Adjustments are carried out according to product and machine specifications
No information
No information
Replaces
State Code National Code Title Type
D3047 ICPCF3106C Set up machine for basic carton folding and gluing Unit of competency
Replaced By
State Code National Code Title Type
OBP47 ICPCBF3060 Set up machine for basic carton folding and gluing Unit of competency