Unit of competency Outline

Date retreived
23/07/2026 5:36 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Weld using oxy fuel gas welding process

Weld using oxy fuel gas welding process

Unit of competency
National Code
MEM05055
State Code
OAW64
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
31/03/2021
View on TGA
State Implementation and Classification
Approved Date
18/04/2021
Field of Education
030711 - Boilermaking And Welding
Original Release Date
18/04/2021
Nominal Hours
36
Description
This unit has been primarily developed for Engineering Tradesperson - Fabrication apprenticeship training and the recognition of trade-level skills in oxy fuel gas welding on heavy or light metal fabrications. It may also apply to other trade occupations requiring higher level oxy fuel gas welding skills.Weld quality would typically conform to AS 1554 General Purpose and American Bureau of Shipping (ABS) or equivalent.Where manual thermal processes associated with preparation, pre-heat and/or post-heat is required unit MEM05007 Perform manual heating and thermal cutting and unit MEM05008 Perform advanced manual thermal cutting, gouging and shaping, should also be selected as appropriate. No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare materials for oxy fuel gas welding oxy fuel gas
  • 2.1 Prepare materials to achieve the required weld requirements
  • 2.2 Assemble/align materials to specification, where required
3 Select, assemble and set up welding equipment and consumables
  • 3.1 Identify and select welding equipment and consumables appropriate to job requirements
  • 3.2 Assemble welding equipment and set up in accordance with SOPs
4 Minimise and rectify distortion
  • 4.1 Apply appropriate distortion prevention measures
  • 4.2 Rectify any distortion using appropriate techniques
5 Weld to job specification using oxy fuel gas
  • 5.1 Ensure weld deposit is to specifications
  • 5.2 Clean joints to specifications
6 Ensure weld conformance
  • 6.1 Inspect weld joints visually for conformance to specifications
  • 6.2 Rectify any weld defects with minimum loss of sound metal using correct techniques and tools
  • 6.3 Complete weld records, where required
No information
No information
Replaced By
State Code National Code Title Type
OET96 MEM05097 Weld using oxy fuel gas welding process Unit of competency