Pathway Outline
Date retreived
22/07/2026 10:12 AM AWST
22/07/2026 10:12 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship - Mechanical (Fitter Machinist)
Pre-Apprenticeship - Mechanical (Fitter Machinist)
Pathway
National Code
—
—
State Code
WA23
WA23
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
27/09/2011
27/09/2011
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
0307 - Mechanical And Industrial Engineering And Technology
Approved Date
19/09/2006
19/09/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
1 Semester
Current Release Version
2.00
2.00
Current Release Date
27/09/2011
27/09/2011
Nominal Hours
600
600
Description
NOTE: Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
THIS PROGRAM REPLACES WT22 PRE-APPRENTICESHIP (MECHANICAL- MECHANICAL FITTER AND METAL MACHINIST)
This training program leads to the completion of Pre-Apprenticeship Mechanical - Fitter Machinist WA23 and MEM05 Metals and Engineering Training Package qualification MEM10105 Certificate I Engineering.
THIS PROGRAM REPLACES WT22 PRE-APPRENTICESHIP (MECHANICAL- MECHANICAL FITTER AND METAL MACHINIST)
This training program leads to the completion of Pre-Apprenticeship Mechanical - Fitter Machinist WA23 and MEM05 Metals and Engineering Training Package qualification MEM10105 Certificate I Engineering.
Packaging Rules
1. Core units
Complete ALL Core units
2. Support units
Complete the following units. Units from other endorsed Training Packages or accredited course may be used to provide language/literacy/numeracy development and/or support in place of the units listed below.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C3513 | BSBCMN102A | Complete daily work activities | 20 | Unit of competency |
| C3512 | BSBCMN101A | Prepare for work | 30 | Unit of competency |
| W2823 | AURC251356A | Read in the workplace | 12 | Unit of competency |
| W2824 | AURC251677A | Use numbers in the workplace | 20 | Unit of competency |
3. Work placement/project units
Complete ALL of the following units
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 50647 | Undertake a Basic Project - 1 | 40 | Module | |
| 50648 | Undertake a Basic Project - 2 | 40 | Module | |
| 50649 | Undertake a Basic Project - 3 | 40 | Module | |
| 50650 | Undertake a Work Placement - 1 | 40 | Module | |
| 50651 | Undertake a Work Placement - 2 | 40 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WT22 | Pre-Apprentice Mechanical Fitter and Metal Machinist | Pathway |
Note
This training program replaces WT22 Pre-apprenticeship (Mechanical - Mechanical Fitter and Metal Machinist).
This training program was created on 11/09/2008, by METS CSSN as a pathway of MEM Certificate I Engineering.
Further information on this program may be obtained by contacting the METS CSSN on 9442 8356 murray.warren@swantafe.wa.edu.au
The units 50647, 50648, 50649, 50550, 50651 have been developed for use in pre-apprenticeship programs in WA. These units should NOT be included in other training programs without first obtaining permission from the manager of the METS CSSN.
*** Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
This training program was created on 11/09/2008, by METS CSSN as a pathway of MEM Certificate I Engineering.
Further information on this program may be obtained by contacting the METS CSSN on 9442 8356 murray.warren@swantafe.wa.edu.au
The units 50647, 50648, 50649, 50550, 50651 have been developed for use in pre-apprenticeship programs in WA. These units should NOT be included in other training programs without first obtaining permission from the manager of the METS CSSN.
*** Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
Entry Requirements
Not Applicable
