Pathway Outline

Date retreived
22/07/2026 7:56 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Computer Numerical Control

Computer Numerical Control

Pathway
National Code
—
State Code
WB58
DTWD Status
Approved
Associated Qualification
Certificate IV in Engineering
National Code
MEM40105
State Code
W245
TGA Status
Replaced
DTWD Status
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
15/09/2013
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
Approved Date
26/10/2006
Stream of Study
Initial Vocational (3100 - 3600)
Duration
4 Semesters
Current Release Version
4.00
Current Release Date
15/09/2013
Nominal Hours
1184
Description
This is a training program that leads to the completion of the Metals and Engineering Training Package MEM05 qualification MEM40105.
This qualification is designed to reflect the role of team leaders and supervisors in the industry sector. The focus is on Mechanical Computer Numerical Control (CNC) specialisation within the mechanical post trade.
Packaging Rules
1. Core units
Complete all units in this group. See Training Package for requirement related to entry with a Certificate III.
State Code National Code Title Hours Type
W5502 MEM13014A Apply principles of occupational health and safety in the work environment 4 Unit of competency
W5531 MEM15024A Apply quality procedures 4 Unit of competency
W5532 MEM15002A Apply quality systems 16 Unit of competency
W5552 MEM17003A Assist in the provision of on the job training 18 Unit of competency
W5452 MEM16008A Interact with computing technology 18 Unit of competency
W5451 MEM16006A Organise and communicate information 18 Unit of competency
D3655 MSAENV272B Participate in environmentally sustainable work practices 20 Unit of competency
W5449 MEM12024A Perform computations 27 Unit of competency
W5492 MEM12023A Perform engineering measurements 48 Unit of competency
W5513 MEM14005A Plan a complete activity 32 Unit of competency
W5512 MEM14004A Plan to undertake a routine task 4 Unit of competency
W5548 MEM16007A Work with others in a manufacturing, engineering or related environment 4 Unit of competency
2. Group A Specialisation Units
Select units from this list to a value of at least 12 points and up to a maximum of 109 points.
State Code National Code Title Hours Type
W5425 MEM09009C Create 2D drawings using computer aided design system 72 Unit of competency
W5368 MEM07023C Program and set up CNC manufacturing cell 54 Unit of competency
W5365 MEM07020C Program multiple spindle and/or multiple axis NC/CNC machining centre 18 Unit of competency
W5363 MEM07019C Program NC/CNC machining centre 18 Unit of competency
W5361 MEM07016C Set and edit computer controlled machines/processes 36 Unit of competency
W5554 MEM18011C Shut down and isolate machines/equipment 18 Unit of competency
W5362 MEM07018C Write basic NC/CNC programs 36 Unit of competency
W5381 MEM07039A Write programs for industrial robots 36 Unit of competency
3. Group B Elective Units
Select units from this group to bring the total value of Group A and B units to 109 points, including any prerequisites.
State Code National Code Title Hours Type
W5460 MEM10005B Commission programmable controller programs 36 Unit of competency
W5416 MEM09022A Create 2D code files using computer aided manufacturing system 72 Unit of competency
W5459 MEM10004B Enter and change programmable controller operational parameters 18 Unit of competency
W5418 MEM09002B Interpret technical drawing 36 Unit of competency
W5595 MEM18004B Maintain and overhaul mechanical equipment 36 Unit of competency
W5621 MEM18007B Maintain and repair mechanical drives and mechanical transmission assemblies 36 Unit of competency
W5564 MEM18020B Maintain hydraulic system components 36 Unit of competency
W5498 MEM12006B Mark off/out (general engineering) 36 Unit of competency
W5369 MEM07024B Operate and monitor machine/process 36 Unit of competency
W5373 MEM07028B Operate computer controlled machines/processes 18 Unit of competency
W5370 MEM07025B Perform advanced machine/process operation 54 Unit of competency
W5421 MEM09005B Perform basic engineering detail drafting 72 Unit of competency
W5352 MEM06007B Perform basic incidental heat/quenching, tempering and annealing 18 Unit of competency
W5357 MEM07012B Perform complex grinding operations 36 Unit of competency
W5356 MEM07011B Perform complex milling operations 36 Unit of competency
W5385 MEM07005B Perform general machining 72 Unit of competency
W5534 MEM15004B Perform inspection 18 Unit of competency
W5386 MEM07006B Perform lathe operations 36 Unit of competency
W5358 MEM07013B Perform machining operations using horizontal and/or vertical boring machines 36 Unit of competency
W5389 MEM07009B Perform precision jig boring operations 36 Unit of competency
W5355 MEM07010B Perform tool and cutter grinding operations 36 Unit of competency
W5419 MEM09003B Prepare basic engineering drawing 72 Unit of competency
W5360 MEM07015B Set computer controlled machines/processes 18 Unit of competency
W5554 MEM18011C Shut down and isolate machines/equipment 18 Unit of competency
No information
Note
This training program is a representation of the qualification code MEM40105 taken from the Metals and Engineering Training Package MEM05 which should be consulted for a full description of requirements.

1. This qualification is the copyright of The Department of Education. Employment and Workplace Relations.

2. Detail on this pathway has been provided by Murray Warren, Manager Registration, Accreditation & Curriculum, Polytechnic West, Phone: 9442 8313 or Email: murray.warren@polytechnic.wa.edu.au.

3. This qualification was entered on to STARS on 29/06/2012.
Entry Requirements
Not Applicable
No information