Qualification Outline

Date retreived
22/07/2026 7:44 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Diploma of Aeroskills (Non-Destructive Testing)

Diploma of Aeroskills (Non-Destructive Testing)

Qualification
National Code:
MEA50511
State Code:
D754
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0315 - Aerospace Engineering And Technology
Original TGA Release Date
23/08/2013
Approved Date
17/06/2014
Stream of Study
Trade Technician/Supervisory or Equivelant (3300)
VET Act Classifier
C
Nominal Hours
1140
Duration
3 Semesters
Current Release Number
2.00
Current Release Date
23/08/2013
VET Act Conditions
Releases
Release Version Release Date TGA Status DTWD Status
2.00 23/08/2013 Current Approved
Description

This qualification applies to individuals who perform non-destructive testing (NDT) on aircraft and aircraft components in accordance with AS 3669-2006 Non-destructive testing - Qualification and approval of personnel - Aerospace at Level 2 and in compliance with the regulatory requirements of CASA and the ADF.

The requirement for the awarding of MEA50511 Diploma of Aeroskills (Non-Destructive Testing) is demonstrated competency in listed units of competency under the conditions set out below. It consists of Core units plus applicable units from Electives Group A.
Core units are as follows:
Preliminary common and technical stream units for individuals who do not have a Certificate IV in Aeroskills
Mandatory units consisting of:
common and technical stream units that relate to the aviation maintenance environment
technical stream and imported units relating to the NDT work environment
imported units that specifically cover the competencies required to perform each relevant NDT technique to the standard specified in AS 3669-2006 Non-destructive testing - Qualification and approval of personnel - Aerospace for Level 2 personnel.
Elective Group A units consist of:
Common units specific to either CASA or ADF regulatory requirements
Technical stream and imported units that are applicable to various areas of employment in the NDT field.

Schedule
Packaging Rules
ENTRY REQUIREMENTS
Individuals seeking this qualification must meet one of the following entry criteria:
- Certificate IV in Aeroskills
- Aircraft Maintenance Engineer Licence issued by CASA
- Attainment of the following nine (9) Aeroskills units of competency:
MEA101B, MEA103B, MEA105C, MEA107B, MEA108B, MEA109B, MEA340A, MEA341A and MEA342A

PACKAGING RULES
To be awarded the MEA50511 Diploma of Aeroskills (Non-Destructive Testing) competency must be demonstrated in twenty seven (27) units, chosen as described below:
- twenty four (24) core units
- three (3) elective units chosen from Group A in accordance with the unit selection guides listed in the qualification outline

Note: Core Units
- MEA109B is equivalent to MEM12023A, MEM18001C and MEM18002B
- MEA260B and MEA261C are together equivalent to MEM12002B and MEM12004B
- MEA103B is equivalent to MEM14005A
1. Core Units

All twenty four (24) units must be completed
Note:
- MEA109B is equivalent to MEM12023A, MEM18001C and MEM18002B
- MEA260B and MEA261C are together equivalent to MEM12002B and MEM12004B
- MEA103B is equivalent to MEM14005A

State Code National Code Title Hours Type
W5428 MEM30012A Apply mathematical techniques in a manufacturing engineering or related environment 60 Unit of competency
WA639 MEM24012C Apply metallurgy principles 36 Unit of competency
D4378 MEA116B Apply occupational health and safety procedures at supervisor level in aviation maintenance 40 Unit of competency
W5497 MEM12005B Calibrate measuring equipment 54 Unit of competency
D4386 MEA133B Communicate aviation technical and maintenance management knowledge 40 Unit of competency
WC040 MEA424A Evaluate aircraft non-destructive tests 80 Unit of competency
D3656 MSAENV472B Implement and monitor environmentally sustainable work practices 40 Unit of competency
W5418 MEM09002B Interpret technical drawing 36 Unit of competency
D4389 MEA142B Manage self in the aviation maintenance environment 40 Unit of competency
W5704 MEM24006B Perform eddy current testing 54 Unit of competency
W5702 MEM24004B Perform magnetic particle testing 36 Unit of competency
W5700 MEM24002B Perform penetrant testing 36 Unit of competency
W5495 MEM12003B Perform precision mechanical measurement 18 Unit of competency
W5696 MEM24010B Perform radiographic testing 54 Unit of competency
W5706 MEM24008B Perform ultrasonic testing 54 Unit of competency
W5419 MEM09003B Prepare basic engineering drawing 72 Unit of competency
W5446 MEM30007A Select common engineering materials 40 Unit of competency
W5466 MEM11011B Undertake manual handling 18 Unit of competency
W5525 MEM15017B Use and maintain reference standards 27 Unit of competency
W8334 MEA135A Use computers in aviation maintenance-related integrated logistic support activities 40 Unit of competency
W8390 MEA260B Use electrical test equipment 20 Unit of competency
D4415 MEA261C Use electronic test equipment 20 Unit of competency
W5501 MEM13013B Work safely with ionizing radiation 36 Unit of competency
W5538 MEM16010A Write reports 18 Unit of competency
2. Group A Elective Units

Three (3) untis to be completed from Group A in accordance with the unit selection guidelines.
Please refer to the training package for the selection guidelines.

State Code National Code Title Hours Type
W5551 MEM17002B Conduct workplace assessment 18 Unit of competency
W5520 MEM15010B Perform laboratory procedures 72 Unit of competency
W8312 MEA112B Plan and implement civil aircraft maintenance activities 80 Unit of competency
WA870 TAEDEL301A Provide work skill instruction 40 Unit of competency
W8339 MEA140A Supervise aviation maintenance teams and perform maintenance quality inspections 40 Unit of competency
D4377 MEA113C Supervise civil aircraft maintenance activities and manage human resources in the workplace 80 Unit of competency
Replaced By
State Code National Code Title Type
AVN8 MEA50515 Diploma of Aeroskills (Non-Destructive Testing) Qualification
No information
Entry Requirements

Individuals seeking this qualification must meet one of the following entry criteria:
Certificate IV in Aeroskills
Aircraft Maintenance Engineer Licence issued by CASA
Attainment of the following nine (9) Aeroskills units of competency:

Unit code
Unit title
Prerequisites
MEA101B
Interpret occupational health and safety practices in aviation maintenance
Nil
MEA103B
Plan and organise aviation maintenance work activities
MEA101B, MEA105C, MEA107B, MEA108B
MEA105C
Apply quality standards applicable to aviation maintenance processes
MEA101B, MEA107B
MEA107B
Interpret and use aviation maintenance industry manuals and specifications
Nil
MEA108B
Complete aviation maintenance industry documentation
MEA105C
MEA109B
Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance
MEA105C, MEA108B
MEA340A
Lay out and set up aircraft systems
MEA101B, MEA107B, MEA109B
MEA341A
Apply basic aircraft design characteristics
MEA101B, MEA107B, MEA109B
MEA342A
Apply basic aircraft power plant design characteristics
MEA101B, MEA107B, MEA109B

Traineeships and Apprenticeships
No information