Qualification Outline

Date retreived
22/07/2026 4:42 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Electrotechnology Assembly and Servicing

Certificate III in Electrotechnology Assembly and Servicing

Qualification
National Code:
UTE30199
State Code:
M025
TGA Status:
Deleted
DTWD Status:
Archived
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
21/07/1999
Approved Date
—
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
864
Duration
Unspecified
Current Release Number
1.00
Current Release Date
21/07/1999
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 21/07/1999 Current Archived
Description
Schedule
1. CORE

CORE UNITS:

Learner to select only one (1) of the UTENES208*A competencies

State Code National Code Title Hours Type
M0581 UTENES203BA Assemble electrical/electronic apparatus (Electrical) 1 Unit of competency
M0742 UTENES501BA Diagnose and rectify faults in apparatus & circuits (Electrical) 4 Unit of competency
M0606 UTENES208QA Disconnect & reconnect fixed wired electrical equipment 1,000Vac/1,500Vdc (Control Devices) 1 Unit of competency
M0605 UTENES208RA Disconnect & reconnect fixed wired electrical equipment 1,000Vac/1,500Vdc (Electrical Heaters) 1 Unit of competency
M0604 UTENES208SA Disconnect & reconnect fixed wired electrical equipment 1,000Vac/1,500Vdc (Motors) 1 Unit of competency
M0608 UTENES208NA Disconnect & reconnect fixed wired electrical equipment 1,000Vac/1,500Vdc (Pre-Assembled Neon Signs) 1 Unit of competency
M0607 UTENES208PA Disconnect & reconnect fixed wired electrical equipment 1,000Vac/1,500Vdc (Single Enclosed C/Device) 1 Unit of competency
M0592 UTENES206BA Maintain & repair apparatus & circuits (Electrical) 4 Unit of competency
M0508 UTENES009A Participate in the training of others 7 Unit of competency
M0677 UTENES401BA Perform Functional Apparatus Checks (Electrical) 5 Unit of competency
M0684 UTENES402BA Test apparatus & circuits (Electrical) 4 Unit of competency
2. ELECTIVES

ELECTIVES: Learner to select one elective.

State Code National Code Title Hours Type
M0501 UTENES002A Attend to breakdown 20 Unit of competency
M0504 UTENES005A Coordinate materials 20 Unit of competency
M0507 UTENES008A Provide technical leadership in the workplace 20 Unit of competency
M0506 UTENES007A Supply projects 20 Unit of competency
3. ELECTIVES

SPECIALISATIONS:

Learner to select one unit of competency from the Specialisation units. A further unit may be selected per Specialisation if required.

Note: The Specialisation selected to a maximum of 306 hours must reflect a licensing outcome as determined by the Office of Energy (WA).


**MACHINES OR SWITCHGEAR SPECIALISATION**

State Code National Code Title Hours Type
M0621 UTENES211A Disconnect & reconnect explosion-protected electrical equip. connected fixed wired 1,000Vac/1,500Vdc 20 Unit of competency
M0644 UTENES215VA Overhaul & repair explosion-protected equipment (Dip) 70 Unit of competency
M0641 UTENES215YA Overhaul & repair explosion-protected equipment (Ex e) 70 Unit of competency
M0642 UTENES215XA Overhaul & repair explosion-protected equipment (Ex i) 70 Unit of competency
M0646 UTENES215TA Overhaul & repair explosion-protected equipment (Ex mixed) 70 Unit of competency
M0643 UTENES215WA Overhaul & repair explosion-protected equipment (Ex n) 70 Unit of competency
M0645 UTENES215UA Overhaul & repair explosion-protected equipment (Ex p) 70 Unit of competency
M0640 UTENES215ZA Overhaul and repair explosion-protected 70 Unit of competency
4. ELECTIVES

**MARITIME MAINTENANCE SPECIALISATION**

State Code National Code Title Hours Type
M0621 UTENES211A Disconnect & reconnect explosion-protected electrical equip. connected fixed wired 1,000Vac/1,500Vdc 20 Unit of competency
M0632 UTENES214ZA Maintain equipment in hazardous areas 5 Unit of competency
M0636 UTENES214VA Maintain equipment in hazardous areas (Dip) 5 Unit of competency
M0633 UTENES214YA Maintain equipment in hazardous areas (Ex e) 5 Unit of competency
M0634 UTENES214XA Maintain equipment in hazardous areas (Ex i) 5 Unit of competency
M0638 UTENES214TA Maintain equipment in hazardous areas (Ex mixed) 5 Unit of competency
M0635 UTENES214WA Maintain equipment in hazardous areas (Ex n) 5 Unit of competency
M0637 UTENES214UA Maintain equipment in hazardous areas (Ex p) 5 Unit of competency
5. ELECTIVE

**GENERAL APPLIANCES OPTION**

Learner to select this group to assist meeting the licensing requirements of the Office of Energy (WA).

State Code National Code Title Hours Type
90090 NUE016 Domestic Appliance Principles 36 Module
86868 NR006 Domestic Refrigerators and Freezers 36 Module
90191 NUE210 Drawing Interpretation and Sketching 18 Module
86873 NR011 Installation 36 Module
90116 NUE095 Parts and Component Selection 18 Module
86884 NR023 Principles of Gas Appliances 36 Module
86722 NR003 Refrigerants 36 Module
86715 NR002 Refrigeration Procedures 36 Module
86866 NR004 Refrigeration System Components 18 Module
86888 NR027 Small Kitchen Appliances 18 Module
86883 NR022 Timers and Controllers 18 Module
6. ELECTIVES

CORE MODULES:

Combinations of these modules can be used to achieve the Units of Competence listed in Group 1. Note each module needs to be done once only, though it may be relevant to several Competencies. See Notes at the end of this document.

State Code National Code Title Hours Type
90070 NUE52 Applied Electricity 1 36 Module
90071 NUE54 Applied Electricity 2 36 Module
90072 NUE55 Applied Electricity 3 36 Module
90073 NUE56 Applied Electricity 4 36 Module
90076 NUE57 Applied Electricity 5 36 Module
87545 NE168 Circuit Protection 18 Module
87549 NE172 Electrical Wiring and Equipment 1 18 Module
87551 NE174 Electrical Wiring and Equipment 3 36 Module
87530 NBB02 Occupational Health and Safety 18 Module
87542 NE166 Single Phase Motors 18 Module
87541 NE165 Three Phase Induction Motors - Control & Protection 54 Module
87529 NE175 Workshop Practices 36 Module
7. ELECTIVE

SPECIALISATION MODULES:

Combinations of these modules can be used to achieve the Units of Competence listed in the Specialisation Groups 3 or 4. Note each module needs to be done once only, though it may be relevant to several Competencies. See Notes at the end of this document.

State Code National Code Title Hours Type
86961 NE019 Basic Transducers 18 Module
87205 NE139 Cells and Batteries 18 Module
86973 NE032 Circuit Development 1 36 Module
90191 NUE210 Drawing Interpretation and Sketching 18 Module
86705 NE031 Electrical Drawing Interpretation & Connection 36 Module
87539 NE163 Electrical Heating 18 Module
87547 NE170 Electrical Installation Requirements 2 54 Module
90280 NUEH02 Explosion-protected Equipment 36 Module
90279 NUEH01 Explosion-protection Principles 9 Module
90281 NUEH03 Install and Maintain Techniques 36 Module
90190 NUE208 Introduction to Welding 18 Module
87540 NE164 Lighting 18 Module
90116 NUE095 Parts and Component Selection 18 Module
86729 NE004 Power Supply Principles 36 Module
86714 NR001 Refrigeration Fundamentals 36 Module
87287 NE157 Rotor Windings 36 Module
87283 NE153 Single Phase Winding 36 Module
87282 NE152 Small Armature Winding 36 Module
87280 NE150 Stator Winding 1 36 Module
87281 NE151 Stator Winding 2 36 Module
86830 NE38 Switchboard Design & Construction 2 36 Module
86965 NE24 Switchboard Design and Construction 36 Module
86954 NE012 Synchronous Machines 18 Module
87284 NE154 Three Phase Winding (1) 36 Module
87285 NE155 Three Phase Winding (2) 36 Module
86733 NE052 Transformers 36 Module
87286 NE156 Winding Development 36 Module
No information
VET Info Notes
The following table indicates the modules that should be completed prior to full assessment of each Unit of Competence.

CORE Unit Suggested modules

UTENES009A
UTENES203BA
UTENES206BA NBB02, NE165, NE166, NE168, NE172, NE175, NUE52, NUE54, NUE55, NUE56, NUE57
UTENES208*A NBB02, NE172, NE175, NUE52
UTENES401BA NBB02, NE165, NE166, NE168, NE169, NE172, NE174, NE175, NUE52, NUE54, NUE55, NUE56, NUE57
UTENES402BA NBB02, NE165, NE166, NE168, NE169, NE172, NE174, NE175, NUE52, NUE54, NUE55, NUE56, NUE57
UTENES501BA


If modules are completed in order shown on the left hand side, Competencies can be assessed as shown

CORE Modules Units that could be assessed
NBB02
NE165
NE166
NE168
NE169
NE172
NE174
NE175
NUE52 UTENES208*A

NUE54
NUE55
NUE56
NUE57 UTENES206BA
UTENES401BA
UTENES402BA




The following table indicates the modules that should be completed prior to full assessment of each Unit of Competence.

SPECIALISATION Unit Suggested modules

UTENES211A NE004, NE031, NE032, NE052, NE012, NE019, NE139, NE150, NE151, NE152,
NE153, NE154, NE155, NE156, NE157, NE163, NE164, NR001, NUE063, NUE095, NUE210

UTENES214*A NE004, NE019, NE031, NE032, NE052, NE163, NE164, NR001, NUE063, NUE095,
NUE210, NUEH01, NUEH02, NUEH03

UTENES215*A NE012, NE052, NE150, NE151, NE152, NE153, NE154, NE155, NUE210, NUEH01, NUEH02


If modules are completed in order shown on the left hand side, Competencies can be assessed as shown


SPECIALISATION Modules Units that could be assessed

NE004
NE012
NE019
NE034
NE032
NEO52
NE139
NE150
NE151
NE152
NE153
NE154
NE155
NE156
NE157
NE163
NE164
NR001
NUE063
NUE095
NUE210 UTENES211A

NUEH01
NUEH02 UTENES215*A

NUEH03 UTENES214*A


This training program is a representation of the qualification UTE30199 taken
from the Electrotechnology Training Package UTE99 which should be consulted for
full descriptions of requirements. UTE99 is accredited until 30/06/2002.

1. This qualification is the copyright of The Australian National Training Authority.

2. Further information on this qualification is contained in the Training Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the CMS by the Midland College of TAFE.

Further information on this program may be obtained from the Principal Lecturer, or Executive Officer, Courses Committee, Midland College of TAFE, PO Box 1336, Midland WA 6936, telephone (08) 9274 9261.
Entry Requirements
No information
Traineeships and Apprenticeships
No information