Qualification Outline

Date retreived
22/07/2026 6:29 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate I in Sugar Milling

Certificate I in Sugar Milling

Qualification
National Code:
SUG10102
State Code:
S255
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0303 - Process And Resources Engineering
Original TGA Release Date
12/10/2002
Approved Date
25/02/2003
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
320
Duration
Unspecified
Current Release Number
1.00
Current Release Date
12/10/2002
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 12/10/2002 Current Approved
Description

Not applicable.

Schedule
1.

GENERIC CORE - PROCESS/BOILER/TURBINE OPERATIONS. Students selecting either of streams listed to complete all core units below.

State Code National Code Title Hours Type
S2813 SUGCCPA1A Collect, present and apply workplace information 20 Unit of competency
S2816 SUGCOHS1A Follow safe work procedures 40 Unit of competency
S2814 SUGCLIP1A Locate industry and company processes (Sugar) 20 Unit of competency
S2815 SUGCMCH1A Manually clean and maintain housekeeping standards 10 Unit of competency
2.

GENERIC CORE - LABORATORY. Students selecting this stream to complete all core listed below PLUS units from the Generic Core Group 1 to make up a total of 100 hours.

State Code National Code Title Hours Type
S2813 SUGCCPA1A Collect, present and apply workplace information 20 Unit of competency
S2814 SUGCLIP1A Locate industry and company processes (Sugar) 20 Unit of competency
S2815 SUGCMCH1A Manually clean and maintain housekeeping standards 10 Unit of competency
C1834 PMLOHS300A Work safely in accordance with defined policies and procedures 30 Unit of competency
3.

SPECIALIST UNITS (BAND A) Students must complete a minimum of 40 hours from group below.

State Code National Code Title Hours Type
N0086 BCG1010A Carry out concreting to simple forms 24 Unit of competency
S2819 SUGPCPS1A Collect and prepare samples 30 Unit of competency
S2853 SUGSPPB1A Prepare pre-ballast 10 Unit of competency
N0222 BCC2000A Read and interpret plans 40 Unit of competency
N0219 BCC1012A Spread and compact materials manually 12 Unit of competency
N0216 BCC1005A Use hand and power tools 40 Unit of competency
N0082 BCG1008A Use simple levelling devices 8 Unit of competency
N0217 BCC1006A Use small plant and equipment 40 Unit of competency
4.

ELECTIVES (BAND B) PROCESSING STREAM. Students may select and complete a maximum of 40 hours from the group(s) listed below.

State Code National Code Title Hours Type
S2818 SUGPCCE2A Chemically clean equipment 30 Unit of competency
S2820 SUGPCSP2A Operate a crystalliser station process 40 Unit of competency
S2825 SUGPHGF2A Operate a high grade fugal station 60 Unit of competency
S2826 SUGPJCP2A Operate a juice clarification process 40 Unit of competency
S2827 SUGPLGF2A Operate a low grade fugal station 40 Unit of competency
S2828 SUGPMFP2A Operate a mud filtration process 30 Unit of competency
S2836 SUGPOPS2A Operate a pans station 80 Unit of competency
S2841 SUGZPC2A Operate a process control interface 30 Unit of competency
S2834 SUGPOEP2A Operate an evaporation process 60 Unit of competency
S2835 SUGPOES2A Operate an extraction station 40 Unit of competency
5.

ELECTIVES (BAND B) LABORATORY STREAM. Students may select and complete a maximum of 40 hours from the group(s) listed below.

State Code National Code Title Hours Type
S2839 SUGPPST2A Perform standard tests 60 Unit of competency
C1864 PMLDATA501A Use laboratory application software 60 Unit of competency
6.

ELECTIVES (BAND B) BOILER/TURBINE SERVICES STREAM. Students may select and complete a maximum of 40 hours from the group(s) listed below.

State Code National Code Title Hours Type
S2830 SUGPOB2A Operate a boiler 60 Unit of competency
S2832 SUGPOBB2A Operate a boiler - basic 60 Unit of competency
S2821 SUGPCWS2A Operate a cooling water system 40 Unit of competency
S2438 TDTD1097B Operate a forklift 40 Unit of competency
S2823 SUGPFSB2A Operate a fuel supply system - bagasse 60 Unit of competency
S2824 SUGPFSC2A Operate a fuel supply system - coal 60 Unit of competency
S2838 SUGPOTB2A Operate a turbine 40 Unit of competency
S2840 SUGPWWT2A Operate a waste water treatment system 40 Unit of competency
S2817 SUGPARS2A Operate an ash separation system 30 Unit of competency
7.

ELECTIVE UNITS - GENERAL. Students to select and complete up to a maximum of 150 hours from list below.

State Code National Code Title Hours Type
S2808 SUGEACW3A Analyse and convey workplace information 40 Unit of competency
C0085 BSZ402A Conduct assessment 15 Unit of competency
S2810 SUGEFTW3A Facilitate teams 40 Unit of competency
S2811 SUGEIEP2A Implement environmental procedures 30 Unit of competency
S2812 SUGEOHS3A Monitor the implementation of occupational health and safety 40 Unit of competency
S2809 SUGEEMP3A Monitor the implementation of the environmental management program 40 Unit of competency
C0084 BSZ401A Plan assessment 15 Unit of competency
C0086 BSZ403A Review assessment 5 Unit of competency
C0087 BSZ404A Train small groups 30 Unit of competency
8.

ELECTIVE UNITS - MAINTENANCE. Students may select electives from group below as part of the 150 hours required. Units chosen must not exceed the maximum of 150 hours for elective units.

State Code National Code Title Hours Type
M1351 MEM5.8AB Advanced manual thermal cutting, gouging and shaping 18 Unit of competency
M1352 MEM5.9AB Automated thermal cutting 18 Unit of competency
M0250 MEM5.5AA Carry out mechanical cutting 18 Unit of competency
M0462 MEM18.55AA Dismantle, replace and assemble engineering components 27 Unit of competency
M0333 MEM9.1AA Draw and interpret sketch 18 Unit of competency
M0334 MEM9.2AA Interpret technical drawing 36 Unit of competency
M1350 MEM5.7AB Manual heating and thermal cutting 18 Unit of competency
M0209 MEM2.5C11A Measure with graduated devices 18 Unit of competency
M0285 MEM7.1AA Operational maintenance of machines/equipment 18 Unit of competency
M2067 MEM5.13AB Perform manual production welding 36 Unit of competency
M1755 MEM5.12AB Perform routine manual metal arc welding 18 Unit of competency
M1356 MEM18.1AB Use hand tools 18 Unit of competency
M0411 MEM18.2AA Use power tools/hand held operations 18 Unit of competency
M1363 MEM18.3AB Use tools for precision work 36 Unit of competency
M1758 MEM5.17AB Weld using gas metal arc welding process 36 Unit of competency
M1756 MEM5.15AB Weld using manual metal arc welding process 36 Unit of competency
Replaced By
State Code National Code Title Type
J137 FDF11012 Certificate I in Sugar Milling Industry Operations Qualification
VET Info Notes
This training program is a representation of the qualification code SUG10102 taken from the Sugar Milling Training Package SUG02 which should be consulted for full description of requirements. SUG10102 is endorsed until [ACCREDITATION END DATE].

1. This qualification is the copyright of The Australian National Training Authority.

2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.

3. To achieve the minimum points required for Specialist Units in Band A (Processing), it will be necessary to select additional specialist units from Band A Services Stream.

4. This qualification was entered on to the STARS by the Training Products Information Services (QA & R, Office of Training, Department of Education and Training) between 11/02/03 and 24/02/03.
Entry Requirements

Not applicable.

Traineeships and Apprenticeships
No information