Qualification Outline
21/07/2026 11:11 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate I in Manufacturing (Pathways) available only to trial sites
Certificate I in Manufacturing (Pathways) available only to trial sites
MSA10105
3676
Deleted
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 01/01/2005 | Current | Approved |
Description
Schedule
1.
To be awarded a Certificate I in Manufacturing (Pathways), competency must be achieved with nine (9) units of competency. Those units must be:
- all three core Pathways units incorporating Employability Skills
- one industry/technical unit from the industry core list (imported from MCM04)
- At least two units selected from the list of elective technical competency units
- three units of competency from any Training Package or Industry Skills Council from a qualification at either AQF level 1 or 2.
*CORE*
Learners to complete the following core units :
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 45401 | MANPCI101A | Adapt to work requirements in the manufacturing industry | 18 | Module |
| 45402 | MANPCI102A | Apply Effective Work Practices | 18 | Module |
| 45403 | MANPCI103A | Demonstrate Care and Apply Safe Practices at Work | 18 | Module |
2.
Depending on the project requirement, 1 of the following may be selected:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 45404 | Make a Product from Plastic | 40 | Module | |
| 45405 | Make a Small Furniture Item From Timber | 40 | Module | |
| 45406 | Make an Object from Cloth using an existing pattern | 40 | Module | |
| 45400 | Make an object from metal | 40 | Module |
3.
At least two units from the list of elective technical competency units and 3 units from any Training Package or Industry Skills Council from a qualification at either AQF level 1 or 2.
*PLASTICS, RUBBER AND CABLE MAKING*
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C5566 | PMBFIN201B | Finish products and components | 26 | Unit of competency |
| C5569 | PMBFIN205B | Hand decorate products | 52 | Unit of competency |
| C5603 | PMBPROD211A | Operate blow moulding equipment | 60 | Unit of competency |
| C5602 | PMBPROD210A | Operate injection moulding equipment | 60 | Unit of competency |
| C5597 | PMBPROD102A | Perform tasks to support production | 30 | Unit of competency |
| C5596 | PMBPROD101A | Use equipment | 30 | Unit of competency |
4.
*TEXTILES, CLOTHING AND FOOTWEAR*
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| E1464 | LMTPRCL10AA | Complete garment assembly tasks involving non-sewing machines - 1 | 20 | Unit of competency |
| E1462 | LMTPRCL09AA | Finish work - 1 | 20 | Unit of competency |
| E1451 | LMTPRCL04AA | Lay-up work - 1 | 20 | Unit of competency |
| E1447 | LMTPRCL03AA | Press work - 1 | 20 | Unit of competency |
| E1440 | LMTPRCL01AA | Sew garments - 1 | 65 | Unit of competency |
5.
*METAL AND ENGINEERING*
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M1350 | MEM5.7AB | Manual heating and thermal cutting | 18 | Unit of competency |
| M0252 | MEM5.7AA | Manual heating, thermal cutting and gouging | 18 | Unit of competency |
| M0220 | MEM3.1AA | Manual production assembly | 36 | Unit of competency |
| M1755 | MEM5.12AB | Perform routine manual metal arc welding | 18 | Unit of competency |
| M1356 | MEM18.1AB | Use hand tools | 18 | Unit of competency |
| M0411 | MEM18.2AA | Use power tools/hand held operations | 18 | Unit of competency |
6.
*FURNISHING*
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W0273 | LMFFM2002A | Assemble furnishing components | 24 | Unit of competency |
| W0371 | LMFSF2001A | Cut single layer fabrics | 40 | Unit of competency |
| W0276 | LMFFM2005A | Join solid timber | 8 | Unit of competency |
| W0271 | LMFFM1002A | Operate basic woodworking machines | 80 | Unit of competency |
| W0370 | LMFSF1001A | Produce basic soft furnishing accessories | 80 | Unit of competency |
| W0274 | LMFFM2003A | Select and apply hardware | 16 | Unit of competency |
| W0272 | LMFFM2001A | Use furniture making sector hand and power tools | 38 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W322 | MSA10107 | Certificate I in Manufacturing (Pathways) | Qualification |
VET Info Notes
Councils (Agi-food, Manufacturing and Transport and Logistics) and is available only on a trial basis to State/Territory
Training Authorities.
2. The project has been funded by ANTA/DEST. For the purpose of trial the three Pathways Certificate Is are
conditionally endorsed for a period of 6 months.
3. The qualification outline has been created on STAR by the Curriculum Development and Research branch, VET Teaching and Learning in October 2005.
4. Further information on this program may be otained from the Manager, VET Teaching and Learning at the WA
Department of Education and Training, telephone (08) 9264 4621.
Entry Requirements
No information
Traineeships and Apprenticeships