Qualification Outline
22/07/2026 4:24 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Advanced Diploma of Aviation Non-Destructive Testing
Advanced Diploma of Aviation Non-Destructive Testing
MEA60318
BDW9
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 31/08/2018 | Current | Approved |
Description
This qualification applies to individuals who perform aircraft and aircraft component non-destructive testing (NDT), develop NDT techniques and provide training in NDT in accordance with AS 3669-2006 Non-destructive testing - Qualification and approval of personnel - Aerospace at Level 3. The qualification also meets the regulatory requirements of the Civil Aviation Safety Authority (CASA) and of the Australian Defence Force (ADF).
The requirement for the awarding of MEA60318 Advanced Diploma of Aviation Non-Destructive Testing is demonstrated competency in listed units of competency under the conditions set out below. It consists of core units and electives chosen from Electives Group A.
Core units include:
preliminary common and technical stream units for individuals who do not have a Certificate IV in Aeroskills or the Diploma of Aeroskills (Non-Destructive Testing)
mandatory units consisting of:
common and technical stream units that relate to the aviation maintenance environment
technical stream and imported units relating to the NDT work environment
imported units that specifically cover the competencies required to perform each relevant NDT technique to the standard specified in AS 3669-2006 Non-destructive testing - Qualification and approval of personnel - Aerospace for Level 2 and 3 personnel
imported units that cover competencies in the development, delivery and assessment of training.
Elective Group A units consisting of:
common units specific to either CASA or ADF regulatory requirements
technical stream and imported units that are applicable to various areas of employment in the NDT field at AS 3669-2006 Non-destructive testing - Qualification and approval of personnel - Aerospace Level 3
Individuals who have a Certificate IV in Aeroskills and/or the Diploma of Aeroskills (Non-Destructive Testing) will already have a significant number of credits towards this qualification.
The qualification also provides credits towards the MEA60218 Advanced Diploma of Aviation Maintenance Management (Mechanical).
This qualification applies to workplaces that operate under the airworthiness regulatory systems of the ADF and CASA. Any regulatory/licensing requirements associated with any MEA units of competency must be met.
Schedule
Packaging Rules
To be awarded the MEA60318 Advanced Diploma of Aviation Non-Destructive Testing, competency must be demonstrated in thirty-nine (39) to forty-eight (48) units, depending on the entry level.Core units of competency
- Individuals who do not have at least a Certificate IV in Aeroskills must complete the following nine (9) preliminary units.
- Individuals who have at least a Certificate IV in Aeroskills and those who have completed the preliminary units must complete the following thirty-five (35) core units.
Electives units of competency
- Complete four (4) units chosen in accordance with the unit selection guidelines in column 4.
1. Core Preliminary Units
All nine (9) units to be completed for the individuals who do NOT have at least a Certificate IV in Aeroskills.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AUD71 | MEA341 | Apply basic aircraft design characteristics | 120 | Unit of competency |
| AUE99 | MEA342 | Apply basic aircraft power plant design characteristics | 120 | Unit of competency |
| OAD16 | MEA156 | Apply quality standards during aviation maintenance activities | 40 | Unit of competency |
| OAD03 | MEA154 | Apply work health and safety practices in aviation maintenance | 40 | Unit of competency |
| OAD08 | MEA157 | Complete aviation maintenance industry documentation | 40 | Unit of competency |
| AUF71 | MEA107 | Interpret and use aviation maintenance industry manuals and specifications | 40 | Unit of competency |
| OAD07 | MEA399 | Lay out and set up aircraft systems | 120 | Unit of competency |
| OAC98 | MEA158 | Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance | 40 | Unit of competency |
| OAD01 | MEA155 | Plan and organise aviation maintenance work activities | 40 | Unit of competency |
2. Core Units
All thirty five (35) units must be completed.
3. Group A Elective Units
Four (4) units must be completed.
Please note that there are Unit Selection Guidelines that must be followed when selecting your elective units.
Refer to TGA training.gov.au for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5544 | MEM16002C | Conduct formal interviews and negotiations | 36 | Unit of competency |
| W5425 | MEM09009C | Create 2D drawings using computer aided design system | 72 | Unit of competency |
| AWY77 | TAEDES401 | Design and develop learning programs | 40 | Unit of competency |
| W5452 | MEM16008A | Interact with computing technology | 18 | Unit of competency |
| AUE62 | MEA123 | Manage aviation maintenance work environment policy and practices | 40 | Unit of competency |
| W5520 | MEM15010B | Perform laboratory procedures | 72 | Unit of competency |
| AUD82 | MEA112 | Plan and implement civil aircraft maintenance activities | 80 | Unit of competency |
| AUE02 | MEA140 | Supervise aviation maintenance teams and perform maintenance quality inspections | 40 | Unit of competency |
| AUE00 | MEA113 | Supervise civil aircraft maintenance activities and manage human resources in the workplace | 80 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVN3 | MEA60315 | Advanced Diploma of Aviation Non-Destructive Testing | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BIB4 | MEA60322 | Advanced Diploma of Aviation Non-Destructive Testing | Qualification |
No information
Entry Requirements
Not applicable
Traineeships and Apprenticeships