Unit of competency Outline

Date retreived
22/07/2026 5:49 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Align sawing production systems

Align sawing production systems

Unit of competency
National Code
FWPSAW3209
State Code
AXJ98
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/10/2016
Nominal Hours
40
Description
This unit of competency describes the outcomes required to align canter rings and chipper heads for wood chipping equipment, which are used for both primary and secondary processing of solid wood products. Work is completed in a forest products factory setting.The unit applies to Sawdoctor, Saw Repairer, Sawyer. No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for aligning
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Select appropriate repair, maintenance and personal protective equipment and check for operational effectiveness in line with manufacturer's recommendations.
  • 1.3 Plan alignment process in line with work order.
2. Conduct shut down
  • 2.1 Follow organisational safety procedures thoughout all maintenance and repair processes.
  • 2.2 Remove, replace and temporarily store mechanical and safety components to provide access to alignment parts.
  • 2.3 Remove, replace and temporarily locate guides.
  • 2.4 Keep work area clear of dust, off-cuts and debris in line with organisational safety procedures.
3. Align rings and heads
  • 3.1 Access and interpret equipment history records, and manufacturer's recommendations.
  • 3.2 Remove canter rings and chipper heads to be aligned.
  • 3.3 Assess performance of canter rings and chipper heads and re-align, according to manufacturer's instructions.
  • 3.4 Check saw for alignment and free operation.
  • 3.5 Identify routine processing and equipment faults and resolve or report to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6065 FPISAW3209B Align sawing production systems Unit of competency
Replaced By
State Code National Code Title Type
OBM11 FWPSAW3244 Align sawing production systems Unit of competency
State Code National Code Title Type
BAK8 FWP30716 Certificate III in Sawdoctoring Qualification
BAM5 FWP30316 Certificate III in Sawmilling and Processing Qualification