Unit of competency Outline

Date retreived
22/07/2026 1:39 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and maintain door control devices and systems

Install and maintain door control devices and systems

Unit of competency
National Code
MEM20026
State Code
OEV91
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030715 - Precision Metalworking
Original Release Date
19/04/2023
Nominal Hours
18
Description
This unit of competency defines the skills and knowledge required to select, install, fault-find and adjust a range of door control devices and door control systems. It applies to work conducted in commercial, industrial and domestic environments.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Select and use personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Review work order, identify job requirements and follow up with appropriate personnel about items requiring clarification
2. Prepare for installation and service
  • 2.1 Select tools, equipment and materials to meet job requirements and check for operational effectiveness in accordance with manufacturer specification
  • 2.2 Identify faulty or unsafe tools and segregate for repair or replacement in accordance with SOPs
  • 2.3 Identify potential and existing risks and hazards associated with maintenance activities and control in accordance procedures and SOPs
3. Install door control devices or system
  • 3.1 Select the appropriate door control device or system for the given door type and specifications
  • 3.2 Install door control device or system in accordance with manufacturer specifications, work order, legislative requirements and SOPs
  • 3.3 Check door control device or system for correct operation and adjust to meet requirements
4. Service door control devices or system
  • 4.1 Conduct checks on door control devices or systems and/or components to identify any damage, friction or sticking in accordance with manufacturer specifications
  • 4.2 Assess viability for continued operation or replacement of door control device
  • 4.3 Adjust door control devices or systems and/or components in accordance with manufacturer specifications, work order, legislative requirements and SOPs
5. Complete installation or service
  • 5.1 Communicate work completion to appropriate personnel in accordance with SOPs
  • 5.2 Complete documentation, and process in a prompt and accurate manner in accordance with SOPs
  • 5.3 Clean work area, tools and equipment, and store in accordance with SOPs
  • 5.4 Report malfunctions, faults, wear or damage to tools for repair or replacement
  • 5.5 Collect waste from service and repair activities, and comply with organisational and environmental requirements for treatment, disposal or recycling
No information
No information
Replaces
State Code National Code Title Type
OAU05 MEM20005 Install and maintain door control devices/systems Unit of competency