Unit of competency Outline

Date retreived
22/07/2026 9:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and maintain door control devices/systems

Install and maintain door control devices/systems

Unit of competency
National Code
MEM20005
State Code
OAU05
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
24/01/2020
Field of Education
030715 - Precision Metalworking
Original Release Date
24/01/2020
Nominal Hours
18
Description
This unit of competency defines the skills and knowledge required to select, install, fault find and adjust a range of door control devices and door control systems. It applies to work conducted in commercial, industrial and domestic environments. No licensing, legislative or certification requirements apply to this unit at the time of publication. Band: AUnit Weight: 2
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Select and use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
  • 1.5 Review work order and clarify with appropriate person(s), as required
2 Prepare for installation and service
  • 2.1 Select appropriate tools, equipment and materials to meet job requirements and check for operational effectiveness in accordance with manufacturers' specification
  • 2.2 Identify faulty or unsafe tools and segregate for repair or replacement in accordance with SOPs
  • 2.3 Identify potential and existing risks and hazards associated with maintenance activities and control in accordance procedures and SOPs
3 Install door control devices/ systems
  • 3.1 Select the appropriate door control device/systems for the given door type and specifications
  • 3.2 Install door control devices/systems in accordance with manufacturers' specifications, work order and legislative requirements and SOPs
  • 3.3 Check door control devices/systems for correct operation and adjust, as necessary
4 Service door control device
  • 4.1 Conduct checks on door control devices/systems and components to identify any damage, friction or sticking in accordance with manufacturers' specifications
  • 4.2 Assess viability for continued operation or replacement of door control device
  • 4.3 Adjust door control devices/systems and/or components in accordance with manufacturers' specifications, work order and legislative requirements and SOPs
5 Complete installation or service
  • 5.1 Make notification of work completion to appropriate person(s) in accordance with SOPs
  • 5.2 Complete documentation and process in a prompt and accurate manner in accordance with SOPs
  • 5.3 Clean work area, tools and equipment and store in accordance with SOPs
  • 5.4 Report malfunctions, faults, wear or damage to tools for repair or replacement
  • 5.5 Collect waste from service and repair activities, treat and dispose or recycle in accordance with organisational and environmental requirements
No information
No information
Replaces
State Code National Code Title Type
W5666 MEM20005A Install and maintain door control devices/systems Unit of competency
Replaced By
State Code National Code Title Type
OEV91 MEM20026 Install and maintain door control devices and systems Unit of competency