Unit of competency Outline

Date retreived
22/07/2026 5:23 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assess and maintain cutter performance

Assess and maintain cutter performance

Unit of competency
National Code
FWPCOT3217
State Code
AXL45
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/10/2016
Nominal Hours
20
Description
This unit of competency describes the outcomes required to assess, test, verify and rectify cutting problems for routing, moulding and planing machines and associated equipment. Work is completed in a forest products factory setting.The unit applies to Sawdoctor, Saw Repairer. No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Inspect and test cutters and equipment
  • 1.1 Obtain information relating to current and past performance problems and review to assess process problems.
  • 1.2 Select appropriate personal protective equipment and check for operational effectiveness.
  • 1.3 Observe cutter and equipment under operating conditions to determine extent of problems.
  • 1.4 Examine timber fed through equipment to determine potential causes of cutting problem.
  • 1.5 Lock-out equipment and inspect cutters and equipment to identify worn, broken and loose components.
2. Assess technical performance
  • 2.1 Compare technical performance against other equipment.
  • 2.2 Assess technical performance of cutting operation to identify future improvements and feasibility of options for new equipment.
  • 2.3 Obtain endorsement from appropriate personnel for identified improvements.
3. Rectify cutter problems
  • 3.1 Identify characteristics of occurring problems and diagnose possible causes.
  • 3.2 Refer to other trades and operations personnel to validate assessed causes.
  • 3.3 Canvass responses and discuss with relevant personnel to identify and agree on preferred option.
  • 3.4 Implement selected course of action, review cutting results and communicate to appropriate personnel.
  • 3.5 Record and report causes of cutting problems and action taken in line with organisational procedures.
No information
No information
Replaces
State Code National Code Title Type
D5928 FPICOT3217B Assess and maintain cutter performance Unit of competency
Replaced By
State Code National Code Title Type
OBM34 FWPCOT3295 Assess and maintain cutter performance Unit of competency