Unit of competency Outline

Date retreived
22/07/2026 6:57 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install vehicle lighting and wiring systems

Install vehicle lighting and wiring systems

Unit of competency
National Code
AURETR009
State Code
AXD94
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to install vehicle, vessel or machinery low voltage (LV) direct current (DC) lighting and wiring systems that are not an integral part of vehicle or machinery controller area network databus (CAN-bus) topography. It involves preparing for the task, installing and testing the operation of lighting and wiring systems, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. LV lighting and wiring systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to install, lighting and wiring system
  • 1.1 Job requirements are determined according to workplace instructions
  • 1.2 Manufacturer specifications and installation fitting instructions are accessed and interpreted
  • 1.3 Installation options are analysed and those most appropriate to the circumstances are selected
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment are selected and checked for serviceability
2. Install and test system
  • 2.1 Lighting and wiring system and components are checked for correct application and damage
  • 2.2 Lighting and wiring system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or other systems
  • 2.3 Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications
  • 2.4 Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and that any problems detected as having been introduced during installation process are rectified
3. Complete work processes
  • 3.1 Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 3.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF089 AURETR2009 Install, test and repair vehicle lighting and wiring systems Unit of competency