Unit of competency Outline

Date retreived
22/07/2026 8:16 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install decorative tiling

Install decorative tiling

Unit of competency
National Code
CPCCWF3005
State Code
OCO82
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040313 - Ceiling, Wall And Floor Fixing
Original Release Date
01/06/2021
Nominal Hours
40
Description
This unit of competency specifies the skills and knowledge required to locate and set out dimensions and plans for decorative tiling projects to form specific patterns.It includes advanced setting out and installation of decorative and heritage tiles.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.Licensing, legislative or certification requirements apply to this unit in some states and territories and users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Plan and prepare to install decorative tiling.
  • 1.1 Read and interpret task work instructions and plan sequence of work.
  • 1.2 Select and use personal protective equipment (PPE) as required for each stage of the task.
  • 1.3 Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
  • 1.4 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.5 Select tools and equipment, check for serviceability and report any faults.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Form decorative design.
  • 2.1 Inspect tiles to ensure conformance with the elements of the design, including colour, shape and geometry of the project.
  • 2.2 Set out and lay out tiles to required shape and size for decorative design.
  • 2.3 Cut tiles to complete the design set out.
  • 2.4 Align tile joints, plumb and square, and position tiles.
3 Install tiles.
  • 3.1 Prepare substrate surfaces.
  • 3.2 Match and mix adhesive with tile and substrate material according to usage and climatic conditions.
  • 3.3 Install tiles to designed set out.
  • 3.4 Install and adjust border and/or decorative tiles to set out.
4 Grout tiles.
  • 4.1 Clean and prepare joints to receive grout.
  • 4.2 Mix and apply grout.
  • 4.3 Clean and polish tiles.
  • 4.4 Protect tiles from damage during remaining construction.
5 Clean up.
  • 5.1 Clear work area and dispose of, reuse or recycle materials.
  • 5.2 Clean, check, maintain and store plant, tools and equipment in accordance with manufacturers’ recommendations.
No information
No information
Replaces
State Code National Code Title Type
W9614 CPCCWF3005A Carry out decorative tiling Unit of competency
State Code National Code Title Type
BGE1 CPC31320 Certificate III in Wall and Floor Tiling Qualification