Unit of competency Outline
Date retreived
23/07/2026 8:02 AM AWST
23/07/2026 8:02 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Install manufactured textile products
Install manufactured textile products
Unit of competency
National Code
MSTTF3014
MSTTF3014
State Code
OEZ26
OEZ26
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
03/07/2023
Field of Education
040319 - Furnishing Installation
Original Release Date
03/07/2023
Nominal Hours
55
Description
This unit describes the skills and knowledge required to install manufactured textile products such as blinds, awnings, annexes, umbrellas and sails. It requires the ability to complete pre-installation tasks, prepare the site, install products and complete quality checking of finished work. Often this work involves working above ground (or deck).The unit applies to individuals working in accordance with established procedures. They use discretion and judgement and take responsibility for overall work outcomes. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for installation
- 1.1 Determine installation requirements from work documentation
- 1.2 Plan installation sequence, identify suitable electrical power outlets and equipment to work above ground based on job requirements
- 1.3 Select and prepare tools, equipment and other resources based on installation requirements
- 1.4 Identify client and others involved in the installation process and establish communication based on job requirements
- 1.5 Obtain access to site in accordance with workplace procedures
2. Prepare site
- 2.1 Identify site safety hazards and take corrective action to reduce injury to self and others
- 2.2 Identify other on-site characteristics for their impact on the installation process
- 2.3 Select, secure and adequately support ladders or other devices required for safe installation when work at heights is involved
- 2.4 Erect appropriate barriers and signs when working overhead
- 2.5 Obtain required assistance when working at heights
- 2.6 Protect site features, fixtures and fittings using suitable coverings prior to start of installation
3. Fit products
- 3.1 Use appropriate marking tools and measuring equipment to mark out fitting positions
- 3.2 Check products to be installed to ensure they meet specifications and are fit for their intended purpose
- 3.3 Use appropriate ladders or other devices to gain height advantage
- 3.4 Sequence all operations according to specifications and workplace procedures to complete installation
- 3.5 Follow work health and safety precautions and environmental practices during all phases of the installation
- 3.6 Work in cooperation with other team members, as required, to fit products
4. Inspect and check quality
- 4.1 Inspect completed work to verify that products and installation work meet job specifications and workplace quality standards
- 4.2 Confirm that products fit and operate correctly
- 4.3 Determine if any re-work or rectification is required, undertake re-work or take other appropriate action based on the nature of the problem
5. Provide customer information and finalise work
- 5.1 Explain and demonstrate use of product to client according to product operating instructions and answer questions within scope of own responsibility
- 5.2 Clean work area, store equipment and perform routine maintenance in accordance with manufacturer instructions and workplace procedures
- 5.3 Complete installation documentation in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAU54 | MSTTF2015 | Install products on and off site | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BIY9 | MST30222 | Certificate III in Manufactured Textile Products | Qualification |