Unit of competency Outline

Date retreived
22/07/2026 7:46 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Erect and dismantle basic scaffolding

Erect and dismantle basic scaffolding

Unit of competency
National Code
CPCCSC2002
State Code
OCN56
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040329 - Scaffolding And Rigging
Original Release Date
01/06/2021
Nominal Hours
40
Description
This unit specifies the skills and knowledge required to erect and dismantle a range of modular scaffolding systems to provide work platforms for construction purposes. Scaffolding systems include edge protection, access ways and falsework (scaffold support systems for formwork). It applies to those who work under the direction of more experienced workers to erect and dismantle a range of modular scaffolding systems. Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.Licensing, legislative, regulatory or certification requirements apply to this unit of competency in some states and territories. For further information, check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Plan and prepare to erect and dismantle basic scaffolding.
  • 1.1 Read work order and associated documentation and clarify work tasks with relevant persons.
  • 1.2 Plan all work to comply with relevant legislation, regulations, standards, codes, work health and safety (WHS), environmental and workplace requirements.
  • 1.3 Select plant, tools and equipment, check for serviceability and rectify or report any faults.
  • 1.4 Select and inspect scaffolding and components, and label and reject damaged components.
  • 1.5 Calculate expected loading on scaffold and supporting structure using load tables and manufacturer specifications.
  • 1.6 Identify site access and egress routes.
2 Whip, tie, splice and inspect ropes.
  • 2.1 Inspect whipping cord and fibre rope for damage and wear.
  • 2.2 Whip designated rope ends in accordance with work order and regulatory requirements.
  • 2.3 Splice designated rope ends in accordance with work order and regulatory requirements.
  • 2.4 Apply and inspect bends and hitches in accordance with work order.
3 Erect basic scaffolding.
  • 3.1 Erect required safety signage and barricades and fit personal protective equipment (PPE).
  • 3.2 Select sole board/base plate in accordance with regulatory and manufacturer requirements.
  • 3.3 Set out and erect scaffolding in accordance with regulatory and manufacturer requirements.
  • 3.4 Erect and install static lines where specified in accordance with regulatory requirements.
  • 3.5 Assemble and erect lifting device as specified.
4 Inspect, repair and alter erected basic scaffolding.
  • 4.1 Inspect erected modular scaffolding for damage, corrosion, wear and compatibility.
  • 4.2 Check current use of scaffolding against original design and confirm that it is in accordance with regulations and specifications.
  • 4.3 Inspect and confirm scaffolding stability.
  • 4.4 Carry out alteration or repair as necessary and within own level of responsibility.
  • 4.5 Complete and date inspection log and handover certificate, ready for signing by a certified scaffolder.
5 Dismantle basic scaffolding.
  • 5.1 Isolate scaffolding with appropriate signage and barricades to ensure safe dismantling.
  • 5.2 Dismantle scaffolding, reversing procedure followed for erection.
6 Clean up.
  • 6.1 Clear work area and dispose of, reuse or recycle materials in accordance with regulatory and workplace requirements.
  • 6.2 Clean, check, maintain and store tools and equipment in accordance with manufacturer and workplace requirements.
No information
No information
Replaces
State Code National Code Title Type
W9499 CPCCSC2002A Erect and dismantle basic scaffolding Unit of competency