Unit of competency Outline

Date retreived
22/07/2026 2:39 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect, test and service batteries

Inspect, test and service batteries

Unit of competency
National Code
AURETR015
State Code
AXD88
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to inspect, test and service vehicle, vessel and machinery batteries. It involves preparing for the task, inspecting battery systems, servicing the systems, and completing workplace processes and documentation, including any associated recommendations for further action.It applies to those working in the automotive service and repair industry. The battery systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to inspect, test and service battery
  • 1.1 Job requirements are determined according to workplace instructions
  • 1.2 Inspection, testing and servicing procedures are accessed and interpreted
  • 1.3 Hazards associated with the work are identified and risks are reported
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Inspect and test battery
  • 2.1 Battery systems are inspected and tested according to workplace procedures and safety requirements
  • 2.2 Battery circuits are tested according to workplace procedures and without causing damage to components or systems
  • 2.3 Inspection results are compared with manufacturer specifications
  • 2.4 Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments
3. Service and maintain battery
  • 3.1 Battery is serviced and maintained according to manufacturer and battery specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  • 3.2 Post-service testingis carried out to confirm battery is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recycle material is collected
  • 4.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF095 AURETR2015 Inspect and service batteries Unit of competency
Replaced By
State Code National Code Title Type
OCJ22 AURETR115 Inspect, test and service batteries Unit of competency