Unit of competency Outline

Date retreived
22/07/2026 12:47 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply texture coat paint finishes by brush, roller and spray

Apply texture coat paint finishes by brush, roller and spray

Unit of competency
National Code
CPCCPD3023
State Code
OCQ12
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040325 - Painting, Decorating And Sign Writing
Original Release Date
01/06/2021
Nominal Hours
24
Description
This unit of competency specifies the skills and knowledge required to apply texture coat paint finishes to different surfaces using brush, roller and spray.The unit includes preparation of the work area and materials, application of the texture coat paint and completion of clean-up activities.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Review work instructions to apply texture coat paint finishes by brush, roller and spray.
  • 1.2 Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.
  • 1.3 Conduct work with regard to responsibilities in conservation areas and heritage-listed buildings.
  • 1.4 Select and fit personal protective equipment (PPE) as required for each task.
  • 1.5 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.6 Identify materials appropriate to the work application, calculate quantities and prepare, handle safely and locate ready for use.
  • 1.7 Select tools and equipment, check for serviceability and report any faults.
2 Prepare materials and application area.
  • 2.1 Check that materials and substrate surfaces are prepared in accordance with manufacturers’ recommendations and relevant Australian Standards.
  • 2.2 Protect surrounding surfaces by drop sheets, masking or removal of objects.
  • 2.3 Implement measures to ensure application area remains free of dust and foreign matter.
  • 2.4 Set-up area to suit selected application system and prepare system and equipment for use, including checking fittings for function and security.
  • 2.5 Mix and adjust texture coat viscosity for application process.
3 Apply texture coat by brush and roller.
  • 3.1 Use brushes and rollers following standard operating procedures and manufacturers’ recommendations.
  • 3.2 Identify defects in coating and take corrective action to achieve required finish.
4 Apply texture coat by spray.
  • 4.1 Set up spray system to manufacturers’ specifications, including checking adjustment by spraying a sample panel.
  • 4.2 Apply texture coat paint using spray system to achieve specified finish.
  • 4.3 Identify defects in coating and take corrective action to achieve required finish.
5 Clean up.
  • 5.1 Clean up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.
  • 5.2 Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile.
  • 5.3 Check and maintain tools and equipment and clean with appropriate solvents.
  • 5.4 Dispose of paint waste and of water and solvents used in cleaning tools and equipment in an environmentally sustainable manner.
  • 5.5 Store tools, equipment and sealed unused materials to avoid spontaneous ignition.
No information
No information
Replaces
State Code National Code Title Type
D7387 CPCCPD3023A Apply texture coat paint finishes by brush, roller and spray Unit of competency