Unit of competency Outline

Date retreived
22/07/2026 5:49 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare and interpret sketches and drawings

Prepare and interpret sketches and drawings

Unit of competency
National Code
FWPCOT3204
State Code
AXL58
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
040301 - Building Science And Technology
Original Release Date
05/10/2016
Nominal Hours
30
Description
This unit of competency describes the outcomes required to identify, select and interpret a sketch or drawing. This unit includes interpreting sketch and drawing details, and preparing sketches and drawings using dimensions, tolerances and notes following industry and site conventions. Work is completed in a forest products office setting.The unit applies to Timber Advisor, Customer Service Officer, Timber Fabricator. No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify and select correct sketch or drawing
  • 1.1 Obtain initial sketches or drawings and confirm work order requirements with appropriate personnel.
  • 1.2 Interpret, check and validate notes, sketches and drawings, to determine correct application.
2. Interpret basic sketch or drawing detail
  • 2.1 Identify and interpret basic sketch and drawing features to provide a three-dimensional picture of components, assemblies or structures.
  • 2.2 Use sketches and drawings to orientate and fit components or assemblies.
  • 2.3 Interpret dimensions and tolerances to correctly measure, select, mark or set up items or equipment.
  • 2.4 Identify areas of insufficient detail and report in line with organisational procedures.
3. Prepare sketch or drawing
  • 3.1 Identify items for drawing to ensure clear communication of requirements.
  • 3.2 Select drawing views to present required information with minimal drawing complexity.
  • 3.3 Develop clear and accurate production sketches or drawings in line with customer expectations, organisational procedures and industry standards.
  • 3.4 Incorporate explanatory notes within sketches and drawings.
  • 3.5 Record and report sketch and drawing interpretation and preparation activities to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D5915 FPICOT3204B Prepare and interpret sketches and drawings Unit of competency
Replaced By
State Code National Code Title Type
OCR61 FWPCOT3303 Prepare sketches and drawings Unit of competency