Unit of competency Outline

Date retreived
22/07/2026 10:16 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove, replace and program electrical and electronic units and assemblies

Remove, replace and program electrical and electronic units and assemblies

Unit of competency
National Code
AURETR026
State Code
AXD78
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to remove, replace and program electrical and electronic units and assemblies integral to vehicle and machinery controller area network databus (CAN-bus). Electrical and electronic units and assemblies include powertrain control modules, engine and body control modules, and other electronic control modules that may require manufacturer programming procedures.It applies to those working in the automotive service and repair industry. The electrical and electronic units and assemblies include those fitted to agricultural machinery, heavy commercial vehicles, light vehicles, vessels, mobile plant machinery, motorcycles or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove, replace and program electrical and electronic units and assemblies
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Workplace procedures and manufacturer specifications are accessed and interpreted
  • 1.3 Removal information is accessed and interpreted from manufacturer and component supplier specifications
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment are selected and checked for serviceability
2. Remove unit and assembly
  • 2.1 Unit and assembly are removed using approved methods, tools and equipment and according to manufacturer specifications, workplace procedures and safety requirements
  • 2.2 Unit and assembly are handled and stored according to manufacturer and component supplier requirements
3. Replace unit and assembly
  • 3.1 Replacement information is accessed and interpreted from manufacturer and component supplier specifications
  • 3.2 Unit and assembly are replaced using approved methods, tools and equipment and according to manufacturer specifications and workplace procedures
4. Program unit and assembly
  • 4.1 Reprogramming options are analysed and those most appropriate are selected
  • 4.2 Component replacement and programming procedures are carried out according to manufacturer and component supplier specifications
  • 4.3 Post-replacement testing is carried out to confirm that unit and assembly are operating to manufacturer specifications and that no other problems are present
5. Complete work processes
  • 5.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use
  • 5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 5.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  • 5.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF108 AURETR3026 Remove, replace and program electrical and electronic units and assemblies Unit of competency