Unit of competency Outline

Date retreived
22/07/2026 6:43 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out OHS requirements

Carry out OHS requirements

Unit of competency
National Code
CPCPCM2023A
State Code
D7406
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
19/05/2011
View on TGA
State Implementation and Classification
Approved Date
10/07/2012
Field of Education
040399 - Building, N.e.c.
Original Release Date
10/07/2012
Nominal Hours
34
Description
This unit of competency specifies the outcomes required to carry out OHS requirements through safe work practices in a plumbing and services work environment.The unit requires the performance of work in a safe manner through awareness of risks, work requirements and the planning and performance of safe work practices with concern for personal safety and the safety of others.It includes the initial response to workplace emergencies and the safe use of electricity.
Notes
Elements and Performance Criteria
1. Participate in workplace induction.
  • 1.1. Workplace induction is received.
  • 1.2. Location of emergency equipment is identified.
  • 1.3. Current workplace emergency and evacuation procedures are identified.
  • 1.4. Identify safe working conditions with employer
  • 1.5. Identify employee and employer rights and responsibilities regarding safe working conditions.
2. Assess risks.
  • 2.1. Hazards in the work area are identified, assessed and reported to designated personnel.
  • 2.2. OHS issues and risks in the work area are identified, assessed and reported to designated personnel.
  • 2.3. Safe work practices, procedures and instructions are followed.
  • 2.4. OHS, hazard, accident or incident reports are completed according to workplace procedures and statutory and regulatory authorities and legislation.
3. Plan and prepare for safe work practices.
  • 3.1. Quality assurance requirements of company operations and safe work practices are recognised and adhered to.
  • 3.2. Personal protective equipment (PPE) is selected, correctly fitted and used in accordance with the requirements of the job.
  • 3.3. Tools and equipment are selected consistent with safe work practice requirements, checked for serviceability, and any faults are reported to supervisor.
  • 3.4. Required barricades, hoardings and signage are determined and erected at job location.
  • 3.5. Material safety data sheets (MSDS) are identified and applied.
  • 3.6. Sustainability principles and concepts are applied to work preparation and application.
4. Use safe work practices to carry out work.
  • 4.1. Work is carried out safely and according to state or territory statutory requirements and company policy.
  • 4.2. Safety hazards and common workplace accidents and incidents are identified in the course of work and reported in accordance with policy.
  • 4.3. Industry, site and personal safety rights and responsibilities are applied.
  • 4.4. Firefighting equipment is selected and used according to type of fire and correct operating procedures..
  • 4.5. Current site emergency and first aid procedures are followed.
5. Maintain safety of self and others.
  • 5.1. Safety signs, identified in terms of colour and shape, symbols and alarms, are adhered to.
  • 5.2. Hazardous chemicals and materials are identified, handled and stored, maintaining the safety to self, others and the environment.
  • 5.3. Incidents are reported according to legislative requirements and workplace procedures.
  • 5.4. Common causes of accidents in the industry are identified and prevention measures implemented in line with site induction.
  • 5.5. Site area is maintained to prevent incidents and accidents and protect self and others.
6. Use electricity safely.
  • 6.1. Safest supply and route for electrical supply are determined.
  • 6.2. Leads are supported and placed in accordance with regulations.
  • 6.3. Power board visual check is conducted.
  • 6.4. Leads and equipment are checked for tags and visual damage.
  • 6.5. Electrical hazards are identified and reported.
7. Apply emergency response.
  • 7.1. Emergencies are identified.
  • 7.2. Emergency response is provided in accordance with company procedures and requirements.
  • 7.3. Details of actions taken are reported in accordance with company procedures and requirements using appropriate communications.
8. Clean up work site area.
  • 8.1. Work area is cleared and materials disposed of, reused or recycled according to legislation, regulations, codes of practice and job specifications.
  • 8.2. Tools and equipment are cleaned, checked, maintained and stored according to manufacturer recommendations and standard work practices.
  • 8.3. Information is accessed and documentation completed according to company requirements.
No information
No information
Replaces
State Code National Code Title Type
W9628 CPCPCM2003A Carry out OHS requirements Unit of competency
Replaced By
State Code National Code Title Type
WF833 CPCPCM2043A Carry out WHS requirements Unit of competency