Unit of competency Outline

Date retreived
22/07/2026 11:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce basic laminated product

Produce basic laminated product

Unit of competency
National Code
ICPCBF2820
State Code
OBP44
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
30
Description
This unit describes the skills and knowledge required to produce basic laminated product, monitor and adjust machinery, maintain transportation of the substrate, identify and rectify faults, and clean and shut down equipment.It applies to individuals who work under direct supervision, and who are responsible for operating and monitoring equipment and machinery.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Maintain reel transportation system
  • 1.1 Monitor and adjust reel stand
  • 1.2 Monitor and adjust web control system according to tension and positioning requirements
  • 1.3 Add substrate to the process according to job specifications
  • 1.4 Monitor and adjust reel rewind section according to tension requirements and confirm no marks, blemishes or damage to finished product has occurred
  • 1.5 Remove substrate from process according to job specifications
  • 1.6 Monitor and adjust sheeting section
2. Maintain basic laminating process
  • 2.1 Monitor and adjust registration of laminating according to sample standard requirements
  • 2.2 Monitor and adjust pressures
  • 2.3 Monitor and adjust adhesion
3. Maintain production process
  • 3.1 Monitor and adjust basic in-line process(es) according to sample standard requirements
  • 3.2 Use machine controls as required
  • 3.3 Monitor and verify performance using the process control system
  • 3.4 Report process adjustments to eliminate problems according to enterprise procedures
4. Identify and rectify problems and faults
  • 4.1 Identify and report problems in laminating machine according to enterprise procedures
  • 4.2 Carry out adjustments and corrections as required and according to manufacturer specifications and within scope of own role
  • 4.3 Identify machine faults requiring repair and report to designated person according to enterprise procedures
  • 4.4 Verify repairs and adjustments as required prior to resumption of operations
5. Conduct shutdown of production process
  • 5.1 Follow shutdown sequence according to manufacturer specifications and enterprise procedures
  • 5.2 Remove substrate waste from operating area and recycle and dispose of, as required, according to regulatory requirements and enterprise procedures
  • 5.3 Clean and disengage all required parts of laminating machinery used in printing process according to manufacturer specifications and enterprise procedures
  • 5.4 Complete required production records and enterprise documentation
No information
No information
Replaces
State Code National Code Title Type
AUN94 ICPCBF282 Produce basic laminated product Unit of competency