Unit of competency Outline

Date retreived
22/07/2026 10:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce basic laminated product

Produce basic laminated product

Unit of competency
National Code
ICPCBF282
State Code
AUN94
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
30
Description
This unit describes the skills and knowledge required to produce basic laminated product, monitor and adjust machinery, maintain transportation of the substrate, identify and rectify faults, and correctly clean and shut down equipment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Maintain reel transportation system
  • 1.1 Reel stand is monitored and adjusted to ensure efficient, continuous operation
  • 1.2 Web control system is monitored and adjusted to ensure correct tension and accurate, continuous positioning of the web for efficient operation
  • 1.3 Substrate is added to the process according to job specifications
  • 1.4 Reel rewind section is monitored and adjusted to maintain correct tension and to ensure no marks, blemishes or damage to finished product
  • 1.5 Substrate is removed from process according to job specifications
  • 1.6 Sheeting section is monitored and adjusted to ensure quality and efficient product delivery
2. Maintain basic laminating process
  • 2.1 Registration of laminating is monitored and adjusted to ensure product quality meets the approved sample standard
  • 2.2 Pressures are monitored and adjusted to ensure product quality meets the approved sample standard
  • 2.3 Adhesion is monitored and adjusted to ensure product quality meets the approved sample standard
3. Maintain production process
  • 3.1 Basic in-line printing/coating/converting/binding/finishing process(es) are monitored and adjusted to ensure product quality meets the approved sample standard
  • 3.2 Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule
  • 3.3 Production is maintained according to work health and safety requirements, manufacturer’s specifications and enterprise procedures
  • 3.4 Manual and/or automatic control is used according to job specifications
  • 3.5 Performance is monitored and verified using the process control system according to enterprise procedures
  • 3.6 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention
  • 3.7 Waste is sorted according to enterprise procedures
4. Identify and rectify problems and faults
  • 4.1 Problems in laminating machine are identified and reported according to enterprise procedures
  • 4.2 Adjustments or corrections are carried out according to specified procedures and are consistent with operator’s skill level
  • 4.3 Laminating machine operation is checked to ensure correct operation
  • 4.4 Process adjustments to eliminate problems are reported according to enterprise procedures
  • 4.5 Faulty performance of equipment is identified and reported according to enterprise procedures
5. Conduct shutdown of production process
  • 5.1 Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures
  • 5.2 Shutdown is conducted in association with fellow workers and in compliance with Work Health and Safety (WHS) requirements
  • 5.3 Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures
  • 5.4 Machine faults requiring repair are identified and reported to designated person according to enterprise procedures
  • 5.5 Repair/adjustment is verified prior to resumption of operations
6. Clean laminating machine at end of run
  • 6.1 Laminating machine is disengaged and cleaned ready for next run
  • 6.2 Adhesive system is washed ready for next run and liquid waste is disposed of according to regulatory requirements and enterprise procedures
  • 6.3 In-line printing/coating/converting/binding/finishing units are cleaned ready for next run
  • 6.4 Reel feed, transportation and delivery systems are disengaged and cleaned ready for next run
  • 6.5 Production records or other documentation are accurately completed where required by enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
D3038 ICPCF282C Produce basic laminated product Unit of competency
Replaced By
State Code National Code Title Type
OBP44 ICPCBF2820 Produce basic laminated product Unit of competency