Unit of competency Outline

Date retreived
23/07/2026 8:18 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform precision levelling and alignment of machines and engineering components

Perform precision levelling and alignment of machines and engineering components

Unit of competency
National Code
MEM18009
State Code
OAU85
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
31/03/2021
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030707 - Metal Fitting, Turning And MacHining
Original Release Date
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to undertake levelling and alignment measurements/readings and perform levelling and/or alignment and adjustment tasks on machines and engineering components.It applies to the setting up and use of precision levelling and alignment devices and where all adjustments are performed according to designated procedures in conformance to specifications.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Undertake levelling and alignment measurements/ readings
  • 2.1 Determine task requirements by inspection of equipment to be levelled and/or aligned
  • 2.2 Select the correct appropriate levelling and/or alignment procedure
  • 2.3 Select correct and appropriate levelling or alignment devices/equipment and set up to procedures or manufacturers’ recommendation
  • 2.4 Apply and utilise principles of levelling and alignment
  • 2.5 Take measurements/readings and record
3 Perform levelling and/or alignment tasks
  • 3.1 Perform levelling realignment calculations using method appropriate for the levelling/alignment application
  • 3.2 Level equipment to specifications using appropriate tools, equipment and techniques
  • 3.3 Complete levelling and alignment task to specifications
  • 3.4 Complete any records required by SOPs
No information
No information
Replaces
State Code National Code Title Type
W5635 MEM18009B Perform levelling and alignment of machines and engineering components Unit of competency