Unit of competency Outline

Date retreived
23/07/2026 12:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect canvas or sail product

Inspect canvas or sail product

Unit of competency
National Code
MSTTF2016
State Code
BAU53
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
080317 - Quality Management
Original Release Date
01/12/2016
Nominal Hours
40
Description
This unit of competency covers the skills and knowledge required to inspect canvas or sail products prior to despatch to customers.The unit of competency applies to workplace inspection processes of a range of non-complex 2-D canvas or sail products and equipment prior to despatch to customers. Discretion, initiative and judgment must be demonstrated on the job in own work, either individually or in a team environment and may involve referral of matters to other enterprise personnel. Work may be conducted in a variety of environments, such as operational indoor or outdoor workplaces and hazardous or exposed conditions.Work may be conducted in small to large scale enterprises and may involve individual and team activities. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to inspect canvas or sail product
  • 2.1 Obtain relevant workplace and customer specifications for the product
  • 2.2 Identify applicable workplace and industry quality standards
  • 2.3 Clear and clean work area to be used for inspection in preparation for the inspection process
  • 2.4 Read and apply workplace procedures and instructions
  • 2.5 Prepare tools and measuring and marking equipment
3 Locate, transport and lay out product
  • 3.1 Locate and transfer completed product safely to the inspection area
  • 3.2 Lay out or hang product for inspection
  • 3.3 Seek assistance to handle product, if necessary
4 Inspect and finalise work
  • 4.1 Inspect product to verify that it meets job specifications and relevant workplace and industry quality standards
  • 4.2 Identify and mark any areas in need of re-work or rectification
  • 4.3 Isolate and report product needing re-work or other actions, as required
  • 4.4 Label and tag inspected product and fold or otherwise prepare products for storage or transport
  • 4.5 Complete documentation in accordance with workplace procedures
  • 4.6 Inform supervisor of any abnormalities indicating a need for maintenance or other action elsewhere in the workplace
  • 4.7 Clean tools and equipment after use and store according to industry, WHS and workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W7477 LMTTF2019A Inspect canvas or sail product Unit of competency
Replaced By
State Code National Code Title Type
OBL79 MSTGN2020 Perform test or inspection to check product quality Unit of competency
State Code National Code Title Type
BDF6 MST20216 Certificate II in TCF Production Operations Qualification