Unit of competency Outline

Date retreived
23/07/2026 12:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake sampling and testing of water

Undertake sampling and testing of water

Unit of competency
National Code
AHCLPW306
State Code
BAS66
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
019909 - Laboratory Technology
Original Release Date
12/01/2017
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to plan and carry out sampling and testing of water quality as part of a monitoring program.This unit applies to individuals who work under broad direction and use discretion and judgement in the selection and use of available resources.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan for sampling and testing field work
  • 1.1 Confirm monitoring schedule
  • 1.2 Identify water quality and environmental parameters
  • 1.3 Identify samples to be collected
  • 1.4 Determine and arrange equipment requirements for water sampling and testing
  • 1.5 Assess range of likely operating conditions, hazards and difficult or sensitive environments for impact on sampling and testing
2. Prepare equipment and resources
  • 2.1 Obtain equipment required for sampling and testing
  • 2.2 Check and calibrate equipment for availability and serviceability
  • 2.3 Verify correct and accurate performance of equipment
  • 2.4 Repair and maintain field-based equipment and instruments
  • 2.5 Collect data or record sheets for use
  • 2.6 Install and protect equipment
  • 2.7 Brief staff undertaking sampling and testing on responsibilities
3. Carry out sampling and testing of water
  • 3.1 Undertake tests in accordance with monitoring plan
  • 3.2 Take and test samples in accordance with monitoring standards
  • 3.3 Prepare, package and send samples to laboratory for external analysis
  • 3.4 Make specific and general observations including information on relevant ambient and antecedent environmental conditions
  • 3.5 Inform appropriate person of obvious water quality or environmental issues immediately
4. Complete water sampling and testing activities
  • 4.1 Clean, repair and store equipment and clothing
  • 4.2 Repair damaged or malfunctioning equipment on site or send to manufacturer or specialist
  • 4.3 Record test results and observations on data sheets
  • 4.4 Report changes in field conditions and equipment
No information
No information
Replaces
State Code National Code Title Type
D6897 AHCLPW306A Undertake sampling and testing of water Unit of competency
Replaced By
State Code National Code Title Type
OCS98 AHCLPW313 Undertake sampling and testing of water Unit of competency