Unit of competency Outline

Date retreived
23/07/2026 6:27 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake sampling and testing of water

Undertake sampling and testing of water

Unit of competency
National Code
AHCLPW313
State Code
OCS98
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
24/12/2020
View on TGA
State Implementation and Classification
Approved Date
21/05/2021
Field of Education
019909 - Laboratory Technology
Original Release Date
21/05/2021
Nominal Hours
65
Description
This unit of competency describes the skills and knowledge required to plan and carry out sampling and testing of water quality as part of a monitoring program.The unit applies to individuals who work in the land management sector. They work under broad direction and use discretion and judgement in the selection, allocation and use of available resources and for problem solving.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan for sampling and testing fieldwork
  • 1.1 Confirm sampling and testing program from supervisor instruction and sampling plan
  • 1.2 Identify parameters for water quality tests
  • 1.3 Identify characteristics and number of samples to be collected
  • 1.4 Identify and select equipment required for water sampling and testing
  • 1.5 Identify hazards, assess risks and implement controls for safe operating conditions and environmental impact of sampling and testing
2. Prepare equipment and resources
  • 2.1 Obtain equipment required for sampling and testing
  • 2.2 Check equipment for availability and serviceability
  • 2.3 Check and calibrate equipment according to workplace procedures and industry standards
  • 2.4 Prepare data or recording documents ready for use
  • 2.5 Secure testing equipment
  • 2.6 Commence use of testing equipment
3. Carry out sampling and testing of water
  • 3.1 Collect and test water samples according to sampling and testing program, industry standards and workplace procedures
  • 3.2 Prepare, package and store samples for transport
  • 3.3 Conduct and record observations for ambient and antecedent environmental conditions
  • 3.4 Report urgent water quality or environmental issues according to workplace procedures
4. Complete water sampling and testing activities
  • 4.1 Clean, check and store equipment
  • 4.2 Consign unserviceable equipment to specialist for repair
  • 4.3 Check data for accuracy and integrity
  • 4.4 Record and report test results and observations according to workplace procedures and traceability requirements
  • 4.5 Report changes in field conditions and equipment
No information
No information
Replaces
State Code National Code Title Type
BAS66 AHCLPW306 Undertake sampling and testing of water Unit of competency