Unit of competency Outline

Date retreived
22/07/2026 11:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare ink and additives (advanced)

Prepare ink and additives (advanced)

Unit of competency
National Code
ICPSUP311
State Code
AUO49
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
30
Description
This unit describes the skills and knowledge required to prepare inks and additives for special colour work or other special purpose inks.It applies to individuals who perform a range of defined tasks relating to the printing and screen printing industry, and who may also provide some leadership and guidance to others with some limited responsibility for the output of others. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Select ink for special colour work or other specialised purpose
  • 1.1 Inks and additives are selected according to job specifications
  • 1.2 Quality and suitability of inks or additives are checked and appropriate action is taken to meet quality standards of client requirements and enterprise and industry standards
  • 1.3 Inks are selected according to end-use of product, suitability of substrate, adhesion, physical and chemical resistance, light fastness, drying method and print process
2. Maintain and calibrate equipment
  • 2.1 Equipment is inspected to ensure it is functional, and where necessary appropriate remedial action is taken prior to commencement
  • 2.2 Equipment is calibrated, cleaned and adjusted according to manufacturer’s/supplier’s instructions
3. Prepare ink for special colour work or other specialised purpose
  • 3.1 Inks and additives are prepared according to work health and safety (WHS) requirements and manufacturer’s/supplier’s instructions with suitable precautions to minimise waste
  • 3.2 Correct colour and weight/volume of ink are calculated, mixed and prepared to match requirements of the job specification and the printing machine to be used
  • 3.3 Formulation of ink and approved colour is appropriately recorded
4. Store and handle ink
  • 4.1 Inks and additives are appropriately stored, handled and labelled according to manufacturer’s/supplier’s instructions to prevent damage and hazards to personnel
No information
No information
Replaces
State Code National Code Title Type
D3263 ICPSU311C Prepare ink and additives (advanced) Unit of competency