Unit of competency Outline

Date retreived
23/07/2026 4:54 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Solve problems in energy supply network protection equipment and systems

Solve problems in energy supply network protection equipment and systems

Unit of competency
National Code
UETTDRIS68
State Code
OBH46
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
25/09/2019
View on TGA
State Implementation and Classification
Approved Date
04/12/2019
Field of Education
020113 - Networks And Communications
Original Release Date
04/12/2019
Nominal Hours
36
Description
This unit covers determining correct operation of energy supply network protection equipment and systems and providing solutions as they apply to energy supply network protection. It encompasses working safely, reading circuit and reticulation diagrams, applying logical problem-solving processes from measurements and completing the necessary documentation.The application of the skills and knowledge described in this unit requires a licence/registration to practice in the workplace subject to regulations for undertaking of electrical work. Other conditions may apply under state and territory legislative and regulatory licencing requirements which must be confirmed prior to commencing this unit.
Notes
Elements and Performance Criteria
1 Prepare to solve problems in energy supply network protection equipment and systems
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) procedures for a given work area are identified, obtained and understood
  • 1.2 WHS/OHS risk control measures and procedures in preparation for the work are followed
  • 1.3 The likely extent of work to be undertaken is envisaged from reports and/or discussions with appropriate personnel
  • 1.4 Advice is sought from the work supervisor to ensure the work is coordinated effectively with others
  • 1.5 Sources of materials that may be required for the work are established in accordance with established procedures
  • 1.6 Tools, equipment and testing devices needed to take measurements are obtained in accordance with established procedures and checked for correct operation and safety
2 Solve problems in energy supply network protection equipment and systems
  • 2.1 WHS/OHS risk control measures and procedures for carrying out the work are followed
  • 2.2 The need to test or measure live work is determined in strict accordance with WHS/OHS requirements and, when necessary, conducted within established safety procedures
  • 2.3 Circuits/machines/plant are checked as being isolated, where necessary, in strict accordance with WHS/OHS requirements and procedures
  • 2.4 Safety hazards resulting from the reports identified and risk control measures devised and implemented in consultation with appropriate personnel
  • 2.5 Problem solving is approached methodically drawing on knowledge of energy supply network protection equipment and systems using measured and calculated values of circuit/apparatus parameters
  • 2.6 Circuit/apparatus/system components are dismantled, where necessary, and parts stored to protect them against loss or damage
  • 2.7 Circuits/components/systems are rechecked and their operational status is confirmed
  • 2.8 Materials/replacement parts required to solve problems are sourced and obtained in accordance with established procedures
  • 2.9 Effectiveness of the repair is tested in accordance with established procedures
  • 2.10 Apparatus is reassembled, finally tested and prepared for return to service
  • 2.11 Unexpected situations are dealt with safely and with the approval of authorised personnel
  • 2.12 Problem-solving activities are carried out without damage to apparatus, circuits the surrounding environment or services using sustainable energy practices
3 Complete and report problem solving in energy supply network protection equipment and systems
  • 3.1 WHS/OHS work completion risk control measures and procedures are followed
  • 3.2 Reusable, faulty or worn components are tagged and dispatched for repair to maintain adequate spares
  • 3.3 Maintenance work activities are documented in accordance with established procedures
No information
No information
Replaces
State Code National Code Title Type
WD694 UETTDRIS68A Solve problems in energy supply network protection equipment and systems Unit of competency
Replaced By
State Code National Code Title Type
OED75 UETDRIS033 Solve problems in network protection Unit of competency
State Code National Code Title Type
BFM0 UEE30320 Certificate III in Custom Electronics Installations Qualification
BFM8 UEE62220 Advanced Diploma of Electrical - Engineering Qualification
BFK5 UEE50420 Diploma of Electrical Engineering Qualification
BFL9 UEE62320 Advanced Diploma of Electrical Engineering - Coal Mining Qualification
BFM2 UEE43020 Certificate IV in Electrical Equipment and Systems Qualification
BFO5 UEE33020 Certificate III in Electrical Fitting Qualification
BFP6 UEE53020 Diploma of Electrical Systems Engineering Qualification
BFK9 UEE63020 Advanced Diploma of Electrical Systems Engineering Qualification
BFN2 UEE40620 Certificate IV in Electrotechnology - Systems Electrician Qualification
BFN0 UEE30820 Certificate III in Electrotechnology Electrician Qualification
BFN8 UEE62120 Advanced Diploma of Engineering Technology - Electrical Qualification
BEW7 UET60219 Advanced Diploma of ESI - Power Systems Qualification
BEW6 UET50219 Diploma of ESI - Power Systems Qualification
BHA8 UET60221 Advanced Diploma of ESI - Power Systems Qualification
BHB0 UET50221 Diploma of ESI - Power Systems Qualification
BHB1 UET40621 Certificate IV in ESI - Power Systems Network Infrastructure Qualification
BEV3 UET40619 Certificate IV in ESI - Power Systems Network Infrastructure Qualification
BHA9 UET50321 Diploma of ESI - Power Systems Operations Qualification
BEW1 UET50319 Diploma of ESI - Power Systems Operations Qualification
BEV7 UET60319 Advanced Diploma of ESI - Power Systems Operations Qualification
BHB2 UET40521 Certificate IV in ESI - Power Systems Substations Qualification
BEV5 UET40519 Certificate IV in ESI - Power Systems Substations Qualification