Unit of competency Outline

Date retreived
22/07/2026 9:57 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service automotive transponder systems

Service automotive transponder systems

Unit of competency
National Code
MEM20013
State Code
OAT97
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
24/01/2020
Field of Education
030715 - Precision Metalworking
Original Release Date
24/01/2020
Nominal Hours
18
Description
This unit of competency defines the skills and knowledge required to identify, analyse, encode and re-encode (programme) automotive transponder security systems on commercial and private use vehicles. No licensing, legislative or certification requirements apply to this unit at the time of publication. Band:This unit has dual status and is to be regarded as both a Specialisation Band A unit and Specialisation Band B unit for progression to C5 (AQF level V).Unit Weight: 2
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Select and use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, job sheets or work instructions
2 Identify service and repair requirements
  • 2.1 Establish ownership and verify in accordance with organisational and industry procedures
  • 2.2 Obtain system and component specifications and other relevant information from appropriate sources and in accordance with organisational and customer requirements
  • 2.3 Establish nature of damage in accordance with organisational procedures, established inspection/diagnostic techniques and original specifications
  • 2.4 Establish service requirements and other information relevant to task in accordance with customer needs, organisational and manufacturer specifications and legislation, codes, regulations and standards
3 Service automotive transponder system
  • 3.1 Identify risks and hazards and make area secure
  • 3.2 Apply specific isolation and safety measures with special regard to associated equipment
  • 3.3 Select tools, equipment, materials and consumables, check for serviceability and use in accordance with manufacturers' specifications and SOPs
4 Program transponder keys
  • 4.1 Identify personal limitations in programming and seek assistance from appropriate sources
  • 4.2 Establish programming requirements in accordance with SOPs and supplier require
  • 4.3 Programme keys to correct specifications
  • 4.4 Test system function to ensure correct operation
5 Finalise servicing process
  • 5.1 Complete documentation and process in accordance with legislative, assignment and organisational requirements
  • 5.2 Clean work area, tools and equipment and store in accordance with SOPs
  • 5.3 Clean vehicle and return to serviceable condition
No information
No information
Replaces
State Code National Code Title Type
W5660 MEM20013A Service automotive transponder systems Unit of competency
Replaced By
State Code National Code Title Type
OEW68 MEM20018 Identify and program transponder keys Unit of competency
OEW66 MEM20019 Service automotive transponder systems using diagnostic equipment Unit of competency
OEW65 MEM20020 Use EEPROM programmers to service automotive transponder systems Unit of competency