Unit of competency Outline

Date retreived
22/07/2026 2:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Sharpen cutting tools

Sharpen cutting tools

Unit of competency
National Code
FWPCOT3210
State Code
AXL52
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030715 - Precision Metalworking
Original Release Date
05/10/2016
Nominal Hours
20
Description
This unit of competency describes the outcomes required to verify cutting tool dimensions, select and set up grinder and attachments, and sharpen cutting tools. Tools include cutters, profile cutters, routers and other rotary cutting tools. Work is completed in a forest products factory setting.The unit applies to Sawdoctor, Sawmaker, Saw Repairer. No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine required cutting tool dimensions
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Obtain site documentation and drawings and verify cutting tool dimensions.
  • 1.3 Check cutter angles to improve efficiency of expended cutting energy in mill operations.
  • 1.4 Check cutting tool condition against required dimensions, angles and finish.
  • 1.5 Assess and document additional cutting processes in line with work order.
2. Select and set up grinder
  • 2.1 Select appropriate repair, maintenance and personal protective equipment and check for operational effectiveness.
  • 2.2 Select grinding wheel of appropriate diameter to suit sharpening requirements and mount on grinder.
  • 2.3 Dress grinding wheel to maintain cutting surface and suit cutting tool dimensions.
  • 2.4 Configure grinder attachments to suit cutting tool dimensions and profile.
3. Operate grinder to sharpen cutting tool blades
  • 3.1 Follow organisational safety procedures and manufacturer’s recommendations throughout all repair and maintenance processes.
  • 3.2 Select grinding speeds and feeds to suit cutting tool material, grinding wheel material and configuration.
  • 3.3 Maintain cutting angles and grind cutting edges to remove nicks, lands and other imperfections.
  • 3.4 Check cutting teeth systematically for consistent measurements to specifications.
  • 3.5 Monitor grinder for operational effectiveness and apply coolant as required.
  • 3.6 Remove cutting tool and store to maintain cutting edges.
  • 3.7 Dispose of unserviceable and damaged cutting tools in line with environmental protection practices.
  • 3.8 Record and report processing problems and equipment faults to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D5921 FPICOT3210B Sharpen cutting tools Unit of competency
Replaced By
State Code National Code Title Type
OBM52 FWPCOT3277 Sharpen cutters in head using a profile knife grinder Unit of competency
OBM51 FWPCOT3278 Sharpen cutters in head using a straight knife grinder Unit of competency
OBM53 FWPCOT3276 Sharpen cutters using a straight knife grinder Unit of competency