Unit of competency Outline

Date retreived
22/07/2026 10:17 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate load shifting equipment

Operate load shifting equipment

Unit of competency
National Code
AUMABA002
State Code
WH886
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
11/03/2014
Nominal Hours
12
Description
This unit describes the performance outcomes required to safely use load shifting equipment.It applies to those in an automotive environment and involves the application of skills and knowledge to select and use suitable load shifting equipment and perform pre-operational inspections to ensure its safe operation.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Inspect load shifting equipment
  • 1.1 Inspection of load shifting equipment is completed according to workplace procedures
  • 1.2 Load weights and volumes are identified, and confirmed by supervisor
  • 1.3 Equipment faults are identified, documented and reported to appropriate personnel
2. Lift, shift and place load
  • 2.1 Load characteristics and handling requirements are identified and appropriate shifting device is selected
  • 2.2 Shifting route is planned and identified hazards are controlled
  • 2.3 Load is placed in specified locations without causing damage to property, machinery or equipment
  • 2.4 Lift, shift and placement of load are completed using approved work health and safety (WHS) methods and equipment, according to workplace procedures
3. Complete load shifting operations
  • 3.1 Post-inspection of load shifting equipment is completed
  • 3.2 Identified faults are tagged and reported
  • 3.3 Load shifting equipment is stored and secured
  • 3.4 Load shifting documentation and maintenance records are completed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE082 AUMABA3002 Operate load shifting equipment Unit of competency
Replaced By
State Code National Code Title Type
OAL48 AUMABA012 Operate load shifting equipment Unit of competency