Unit of competency Outline

Date retreived
22/07/2026 6:01 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Develop patterns from a block using basic patternmaking principles

Develop patterns from a block using basic patternmaking principles

Unit of competency
National Code
MSTCL3009
State Code
BAX35
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030107 - Garment Making
Original Release Date
01/12/2016
Nominal Hours
50
Description
This unit of competency covers the skills and knowledge required to develop patterns from a block using basic patternmaking principles.The unit of competency applies to the development of a variety of pattern styles utilising the basic principles of patternmaking, including dart manipulation and square blocking.Work may be conducted in small to large scale enterprises and may involve individual and team activities.Work is conducted according to defined procedures.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to develop patterns
  • 2.1 Set up workstation and patternmaking tools and equipment
  • 2.2 Analyse design to identify appropriate modifications
  • 2.3 Identify fabric performance characteristics that may affect garment pattern and determine ease allowance
  • 2.4 Plan pattern development according to quality standards and workplace procedures
  • 2.5 Select appropriate block
3 Apply basic patternmaking principles to develop patterns
  • 3.1 Apply patternmaking principles in developing patterns
  • 3.2 Document methods and formulas used
  • 3.3 Check pattern pieces for accuracy, including seam and ease allowances, seam match, hems and functional openings
  • 3.4 Label all pattern pieces, including grain lines, notches, pattern information and cutting instructions
4 Test patterns and complete work
  • 4.1 Make a toile to test fit and accuracy of pattern
  • 4.2 Alter pattern to reflect test fitting outcomes and quality standards
  • 4.3 Document alterations to patterns
  • 4.4 Complete pattern specification sheets and attach to patterns for storage
  • 4.5 File finished patterns in storage system
No information
No information
Replaces
State Code National Code Title Type
W7175 LMTCL3009B Develop patterns from a block using basic patternmaking principles Unit of competency
Replaced By
State Code National Code Title Type
OEZ52 MSTAT3002 Develop patterns using basic patternmaking principles Unit of competency