Unit of competency Outline
Date retreived
22/07/2026 8:57 PM AWST
22/07/2026 8:57 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Test and repair basic electrical circuits
Test and repair basic electrical circuits
Unit of competency
National Code
AURETR012
AURETR012
State Code
AXD93
AXD93
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to inspect, test and repair basic electrical circuits in vehicle and machinery electrical systems. It involves preparing for the task, inspecting and testing the circuit, repairing the circuit, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The basic electrical circuits include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to test basic electrical circuit
- 1.1 Job requirements are determined according to workplace instructions
- 1.2 Testing procedures and information are accessed and interpreted
- 1.3 Fault finding options are analysed and those most appropriate to the circumstances are selected
- 1.4 Hazards associated with the work are identified and risks are managed
- 1.5 Tools and electrical test equipment are selected and checked for serviceability
2. Test circuit
- 2.1 Basic electrical circuit is checked to establish extent of failure or damage
- 2.2 Circuit is tested according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
- 2.3 Faults are identified from test results and causes of faults are determined
- 2.4 Findings are reported according to workplace procedures
3. Repair and check circuit
- 3.1 Repair procedures and information are accessed and interpreted
- 3.2 Repair options are analysed and most appropriate option is selected
- 3.3 Repair tools and materials are selected according to job requirements
- 3.4 Circuit components are repaired and adjusted according to manufacturer specifications, workplace procedures and safety requirements
- 3.5 Post-repair testing is carried out to confirm basic electrical circuit is operating correctly, any reported problems are resolved, and no other problems are present
4. Complete work processes
- 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use
- 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
- 4.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
- 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF092 | AURETR2012 | Test and repair basic electrical circuits | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCK10 | AURETR112 | Test and repair basic electrical circuits | Unit of competency |