Unit of competency Outline

Date retreived
22/07/2026 9:41 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply basic survival skills in the event of vessel abandonment

Apply basic survival skills in the event of vessel abandonment

Unit of competency
National Code
MARF060
State Code
OFE73
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/11/2024
View on TGA
State Implementation and Classification
Approved Date
26/03/2025
Field of Education
031705 - Marine Craft Operation
Original Release Date
26/03/2025
Nominal Hours
25
Description
This unit involves the skills and knowledge required to apply basic survival skills in the event of vessel abandonment. This unit applies to people working in the maritime industry in a deck and or engine room capacity on vessels up to 100 metres and with propulsion power up to 3000 kW within the exclusive economic zone (EEZ). They could be working independently or as part of a vessel crew.Licensing/Regulatory InformationLegislative and regulatory requirements are applicable to this unit. This unit is one of the requirements to obtain Australian Maritime Safety Authority (AMSA) certification as a General Purpose Hand NC, Coxswain Grade 2 NC, Coxswain Grade 1 NC, Marine Engine Driver Grade 3 NC, Master (Inland waters), Master <24 m NC, Marine Engine Driver Grade 2 NC, Mate up to 100m NC, Master up to 45 m NC and Marine Engine Driver Grade 1 NC, as specified in Marine Order 505. Seafarers seeking certification should check with AMSA.
Notes
Elements and Performance Criteria
1 Prepare to abandon vessel
  • 1.1 Nature of emergency is determined to minimise potential dangers and threats
  • 1.2 Muster and abandon vessel signals are responded to according to vessel emergency preparedness procedures and regulatory requirements
  • 1.3 Survival equipment is organised to maximise chances of survival
  • 1.4 Emergency position indicating radio beacon (EPIRB) is operated to transmit distress signal
  • 1.5 Distress calls are made using radio equipment on distress call frequency
  • 1.6 Others are assisted to maximise their chances of survival
2 Determine operational safety requirements
  • 2.1 Relevant maritime legislation is identified and implemented
  • 2.2 Safety requirements for a range of near coastal vessels are identified, accessed and reviewed
  • 2.3 Lifesaving and survival equipment required on board a near coastal vessel are accurately identified
  • 2.4 Lifesaving equipment on board is checked and confirmed as serviceable
  • 2.5 Lifesaving and survival equipment certificates and documentation are checked for validity
  • 2.6 Vessel emergency preparedness procedures of the safety management systems (SMS) and plans are located, interpreted and applied
3 Practise survival techniques
  • 3.1 Typical emergency alarms and types of alarm systems are accurately identified
  • 3.2 Need to abandon vessel is determined according to established safety practice and procedures
  • 3.3 In-water survival techniques are implemented according to established safety practice and procedures
  • 3.4 Threats to survival are identified and treatment options are outlined
4 Apply survival techniques
  • 4.1 Lookout for vessels and aircraft is maintained and distress signals are released on sighting
  • 4.2 During an emergency, work is carried out collaboratively with other crew and passengers as required
  • 4.3 During emergency and survival situations, appropriate communication skills and techniques are implemented
  • 4.4 Instructions given by rescue personnel to safely access rescue craft are followed
5 Operate lifesaving and survival equipment
  • 5.1 Range of pyrotechnic and distress signals are operated according to established safety practice and procedures
  • 5.2 Survival equipment is operated according to instructions and accepted survival practice
  • 5.3 Lifejackets and other lifesaving equipment are operated and used according to instructions
6 Participate in abandon vessel drills
  • 6.1 Regulatory requirements and company procedures for musters and drills are identified and implemented
  • 6.2 Actions required for emergency signals are correctly identified
  • 6.3 Action is taken promptly to address problems that may arise when following vessel abandonment procedures
  • 6.4 Hazards are identified that may occur when abandoning vessel and risks are minimised according to SMS, and established safety practice and procedures
  • 6.5 Information relevant to use of lifesaving equipment is accessed and applied
  • 6.6 Types of emergencies that may lead to vessel abandonment are outlined
No information
No information
Replaces
State Code National Code Title Type
OAB54 MARF027 Apply basic survival skills in the event of vessel abandonment Unit of competency