Unit of competency Outline

Date retreived
22/07/2026 3:03 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Manage communication systems during an incident

Manage communication systems during an incident

Unit of competency
National Code
PMAOMIR321B
State Code
W8924
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
11/11/2010
State Implementation and Classification
Approved Date
05/09/2013
Field of Education
061301 - Occupational Health And Safety
Original Release Date
05/09/2013
Nominal Hours
30
Description
This unit covers the management and availability of effective communication systems during an incident. The person would typically respond to the incident coordinator or the incident manager.
Notes
Elements and Performance Criteria
1. Check existing communications systems
  • 1.1. Check that the available communications systems are operable
  • 1.2. Ensure that personnel are available and trained to use the existing facilities
  • 1.3. Ensure that recording systems are in place to enable accurate recording of data.
2. Provide necessary communications systems
  • 2.1. Identify stakeholders in the incident management process
  • 2.2. Identify the communication needs of these stakeholders
  • 2.3. Plan for the acquisition and deployment of the systems necessary to provide the communication needs
  • 2.4. Acquire, set up and put into operation the communications systems as required
  • 2.5. Allocate and train personnel as required to support the communication systems provided.
3. Prepare contingency plans
  • 3.1. Review the incident information available to estimate possible future communication requirements
  • 3.2. Prepare contingency plans for communication requirements, including all equipment, facilities, resources and people
  • 3.3. Manage the contingency plan to ensure that systems are provided as required
  • 3.4. Review and update the requirements throughout the incident
4. Keep a record of the incident
  • 4.1. Maintain a chronological record of the incident, the needs, resources and solutions as the incident progresses
  • 4.2. Prepare a report, including recommendations for the future, at the conclusion of the incident
5. Control hazards concerned with the communications systems
  • 5.1. Identify hazards in the work environment
  • 5.2. Assess the risks arising from those hazards
  • 5.3. Implement measures to control those risks in line with procedures and duty of care
6. Respond to problems
  • 6.1. Identify possible problems in equipment or process
  • 6.2. Determine which problems need action
  • 6.3. Determine possible fault causes
  • 6.4. Rectify problem(s) using appropriate solution(s) within area of responsibility
  • 6.5. Follow through items initiated until final resolution has occurred
  • 6.6. Report problems outside area of responsibility to designated person.
RANGE STATEMENT
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Codes of practice/ standards
Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.
Context
This unit of competency includes all such items of equipment and unit operations which form part of the incident response system. In your facility this may include:
telephone equipment, including handsets, switchboards, satellites and lines
mobile phones, fax machines, video conferencing, messaging/paging
computers, Internet, email
radio systems (HF, VHF)
printers, copiers and supplies.
Typical problems for your facility may include:
damage to existing infrastructure
availability of equipment and resources
lack of specialised and/or trained people
volume of communications being received.
Health, safety and environment (HSE)
All operations to which this unit applies are subject to stringent health, safety and environment requirements, which may be imposed through State or Federal legislation, and these must not be compromised at any time. Where there is an apparent conflict between Performance Criteria and HSE requirements, the HSE requirements take precedence.
Relationship to Major Hazard Facility Legislation
Organisations within the Chemical, Hydrocarbons and Oil Refining industries may find themselves falling under the provisions of various Major Hazard Facilities legislation. In developing this unit consideration has been given to the requirements of Sections 8 and 9 of the National Standard for the Control of Major Hazard Facilities [NOHSC:1014(2002)] and the National Code of Practice for the Control of Major Hazard Facilities [NOHSC:2016(1996)].
This unit will assist individuals to meet some of their obligations under the relevant State or Territory legislation. Responsibility for appropriate contextualisation and application of the unit to ensure compliance however, remains with the individual organisation.
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Overview of assessment
Assessment for this unit of competency will be by way of simulation or observation under incident conditions. The unit will be assessed in as holistic a manner as is practical and may be integrated with the assessment of other relevant units of competency. Assessment will occur over a range of situations which can include a variety of incident circumstances.
Simulations must, as closely as possible, approximate actual incident conditions and should be based on the actual facility. Assessments should include walk-throughs of the relevant competency components and may include the use of case studies/scenarios and role plays.
This unit of competency requires a significant body of knowledge which will be assessed through questioning and the use of 'what-if' scenarios both in the facility (during demonstration of normal operations and walk-throughs of abnormal operations) and off the site.

Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competence must be demonstrated in the ability to recognise and analyse potential situations requiring action and then in implementing appropriate responsive action. The emphasis should be on the ability to deal effectively with the incident or to contribute effectively to the recovery from the incident.
Consistent performance should be demonstrated. In particular look to see that:
key communication channels are identified and maintained
information is supplied to the key personnel involved in the incident
appropriate documentation including reports, journal entries, logs and/or clearances are completed in accordance with procedures.
These assessment activities should include a range of problems, including new, unusual and improbable situations which may have been generated from past workplace incident history, incidents in similar workplaces around the world, hazard analysis activities and/or similar sources.

Context of and specific resources for assessment
Assessment will require (1) access to an accurately simulated environment in the absence of an on-site incident environment, or (2) a suitable method of gathering evidence of responding ability over a range of situations. A bank of scenarios/case studies/what-ifs will be required as will a bank of questions which will be used to probe the reasoning behind the observable actions.

Method of assessment
In all plants it may be appropriate to assess this unit concurrently with relevant teamwork and communication units.

Guidance information for assessment
Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.
Replaces
State Code National Code Title Type
C7858 PMAOMIR321A Manage communication systems during an incident Unit of competency
Replaced By
State Code National Code Title Type
AXN71 PMAOMIR321 Manage communication systems during an incident Unit of competency