Unit of competency Outline

Date retreived
22/07/2026 8:09 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain pneumatic systems

Maintain pneumatic systems

Unit of competency
National Code
MEM18019
State Code
OAU75
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
31/03/2021
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030701 - Mechanical Engineering
Original Release Date
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to undertake preventive maintenance checks/adjustments on pneumatic systems, and fault-find, replace, repair or overhaul and recommission pneumatic systems.It applies to pneumatic systems in industrial and mobile plant and equipment used in manufacturing, agricultural, forestry, mining and transport industries.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: BUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Undertake preventative maintenance checks/adjustments on pneumatic systems
  • 2.1 Identify system components, assemblies or sub-assemblies and prepare for inspection/preventative maintenance
  • 2.2 Carry out visual inspection and testing with appropriate test equipment according to fluid power principles, procedures and safety requirements
  • 2.3 Perform scheduled preventative maintenance tasks, including obvious repairs and adjustments, according to manufacturers' specification using fluid power techniques/practices
3 Undertake fault-finding on pneumatic systems
  • 3.1 Identify designated pneumatic system components and carry out visual inspection of the system for the collection of fault-finding data
  • 3.2 Consult system operator and collect additional data, where appropriate
  • 3.3 Check maintenance reports and preventative maintenance schedules and review for additional fault-finding data
  • 3.4 Undertake checks and tests
  • 3.5 Identify and verify faults and malfunctions
  • 3.6 Document or report faults and malfunctions to designated personnel using appropriate procedures
4 Repair and/or overhaul pneumatic power system
  • 4.1 Isolate system or sub-assembly and discharge residue pressure safely in accordance with prescribed procedures or check for correct isolation
  • 4.2 Tag isolated system or sub-assembly according to SOPs
  • 4.3 Remove component or sub-assembly from system
  • 4.4 Dismantle components or sub-assemblies, examine and verify for replacement, repair or overhaul
  • 4.5 Select replacement items from appropriate sources
  • 4.6 Rectify faulty items
  • 4.7 Refit component or sub-assembly items to equipment and test for compliance against specifications
5 Recommission pneumatic system
  • 5.1 Re-commission system or sub-assembly according to prescribed procedures and specifications
  • 5.2 Verify correct operation of the system using fluid power principles and system application techniques
  • 5.3 Instigate appropriate follow-up procedures
  • 5.4 Update maintenance records/service reports
No information
No information
Replaces
State Code National Code Title Type
W5562 MEM18019B Maintain pneumatic systems Unit of competency