Unit of competency Outline

Date retreived
22/07/2026 9:51 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform general drilling operations

Perform general drilling operations

Unit of competency
National Code
FBPSUG2026
State Code
OAM13
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
18/12/2018
View on TGA
State Implementation and Classification
Approved Date
18/04/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
18/04/2019
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to carry out general drilling operations using a radial arm drill. The unit applies to individuals who work under supervision in the sugar milling industry.All work must be carried out to comply with workplace procedures according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for drilling operations
  • 1.1 Identify drilling requirements according to specifications
  • 1.2 Select, fit and use personal protective equipment according to workplace safety procedures
  • 1.3 Ensure the workplace meets and is maintained according to workplace cleaning standards
  • 1.4 Collect and prepare materials to be drilled
  • 1.5 Set up drill according to specified drilling requirements
  • 1.6 Conduct pre-operational equipment checks according to operating procedures
  • 1.7 Identify and report health and safety hazards and maintenance requirements
2. Operate drill to achieve specifications
  • 2.1 Position and clamp materials for drilling operation according to operating procedures
  • 2.2 Start, operate and shut down the drill according to operating procedures
  • 2.3 Check work against specifications
  • 2.4 Identify non-conforming components, and correct as required
  • 2.5 Undertake basic routine operational maintenance according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WD856 FDFSUG226A Perform general drilling operations Unit of competency