Elements and Performance Criteria

RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OHS requirements:
are to be in line with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
fire fighting equipment
hazard and risk control
fatigue management
elimination of hazardous materials and substances
safe forest practices, including required actions relating to forest fire
manual handling including shifting, lifting and carrying
Environmental requirements may include:
legislation
organisational policies and procedures
workplace practices
Legislative requirements:
are to be in line with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice and may include:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
Organisational requirements may include:
legal
organisational and site guidelines
policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS, emergency and evacuation procedures
ethical standards
recording and reporting requirements
equipment use, maintenance and storage requirements
environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines)
Work order is to include:
instructions for the cutting and despatch of timber and timber products from the work site
and may include:
type
size
length
angle
quantity
grade
instructions for the environmental monitoring of work and procedures
environmental care requirements relevant to the work
Appropriate personnel may include:
supervisors
suppliers
clients
colleagues
managers
Material may include:
native timber species
imported timber species
dressed timber
in-the-rough timber
stress and non-stress graded timber
preservative treated timber
medium density fibreboard
laminated veneer
chipboard
fibreboard and other manufactured board products
coated and/or treated timber products
beams, including laminated beams
Cutting is to include:
sawing operations with CNC equipment
Storage locations may include:
storage racks
storage bays
bins
stacks
pallet boxes
modularised storage components
temporary stacking bays (stand, frame or ground)
and may be divided into:
standard product classification
product designation
size
dimension
stack number
weight
grade
shelf life
stock rotation position
Equipment is to include:
CNC beam saws
procedures for lock-out, such as protecting operators and co-workers from accidental injury by isolating the machine from the power source
and may include:
CNC double end profiling machines
Communication may include:
verbal and non-verbal language
constructive feedback
active listening
questioning to clarify and confirm understanding
use of positive, confident and cooperative language
use of language and concepts appropriate to individual social and cultural differences
control of tone of voice
CNC program
is the computer-generated program selected by the operator (sub-programs, parametric performance of CAM functions, downloading and storage of data), which translates into the CNC equipment operating automatically to fulfil its programmed instructions
Machine settings may include:
measuring and setting equipment to:
stops
fences
angles
depths
feeds
speeds
Disposing of may include:
recycling unsuccessful trial runs/items that do not meet quality requirements
re-using unsuccessful trial runs/items that do not meet quality requirements
redirecting unsuccessful trial runs/items that do not meet quality requirements for energy recovery
Pre-startup checks
are conducted to ensure:
equipment has been set up correctly
blades are installed accurately
machinery is operating to optimum performance
Output is to include:
the speed or rate at which material is cut
Waste may include:
off-cuts
shavings
sawdust
Records and reports may include:
cutting method
product type
size
inspection information
grading and labelling outcomes
storage locations
quality outcomes
hazards
incidents
equipment malfunctions
and may be:
manual
computer-based system
other appropriate organisational communication system
Dealing with may include:
repairing or sending removed blades for repair
recycling removed blades that cannot be repaired
sending removed blades that cannot be repaired to waste

EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently cut materials using CNC sizing machines according to organisational requirements
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:
following applicable commonwealth, state or territory legislative and regulatory requirements and codes of practice relevant to cutting material using CNC sizing machines
following organisational policies and procedures relevant to cutting material using CNC sizing machines
cutting materials using CNC equipment in line with the work order and within prescribed organisational tolerances
setting computer programs for the CNC equipment to follow
conducting operator maintenance on CNC equipment
Context of and specific resources for assessment
Competency is to be assessed in the workplace or realistically simulated workplace
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints
Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context
Assessment is to follow relevant regulatory or Australian Standards requirements
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to undertaking work applicable to this unit
specifications and work instructions
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge
Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills
Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances
Assessment may be in conjunction with assessment of other units of competency
The assessment environment should not disadvantage the candidate
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English
Where the participant has a disability, reasonable adjustment may be applied during assessment
Language and literacy demands of the assessment task should not be higher than those of the work role