Unit of competency Outline

Date retreived
23/07/2026 5:01 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install or replace mechanical units and assemblies

Install or replace mechanical units and assemblies

Unit of competency
National Code
AUMGTM013
State Code
OAL47
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
12/12/2018
View on TGA
State Implementation and Classification
Approved Date
12/02/2019
Field of Education
030503 - Vehicle Mechanics
Original Release Date
12/02/2019
Nominal Hours
36
Description
This unit describes the performance outcomes required to install, and replace and adjust mechanical units and assemblies.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a production worker level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare
  • 1.1 Interpret drawings and work orders to establish work requirements
  • 1.2 Select lifting gear and operate according to workplace procedures
  • 1.3 Select and inspect tools and equipment and report any faults
2. Install and test mechanical units and assemblies
  • 2.1 Select fasteners, fittings and materials for installation
  • 2.2 Install and test mechanical units and assemblies according to job specifications and work health and safety (WHS) procedures
  • 2.3 Use tools and equipment to install and replace assemblies
3. Remove, replace and test mechanical units and assemblies
  • 3.1 Access and interpret assembly information from manufacturer specifications
  • 3.2 Remove and replace mechanical units and assemblies according to manufacturer specifications and WHS procedures
  • 3.3 Test mechanical units and assemblies according to manufacturer specifications
4. Complete work processes
  • 4.1 Clean and check work area and store tools and equipment according to workplace procedures
  • 4.2 Identify, tag and report faulty equipment
  • 4.3 Collect waste material and recycle or dispose of according to workplace procedures
  • 4.4 Complete workplace documents according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WH958 AUMGTM003 Install or replace mechanical units and assemblies Unit of competency