Unit of competency Outline

Date retreived
23/07/2026 5:10 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Collect and log motor sport data

Collect and log motor sport data

Unit of competency
National Code
AURMTA009
State Code
AXB95
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
010103 - Statistics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to collect and log motor sport data. It involves identifying data requirements, preparing for the task, collecting, logging, and evaluating data, and completing workplace documentation.It applies to those working in the motor sport industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify motor sport data collection requirement
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Data specific requirements are determined from team instructions and procedures and controlling body rules, category rules and supplementary regulations
  • 1.3 Purpose and end users of data are identified
  • 1.4 Sources of data are identified
2. Prepare resources for data collection
  • 2.1 Checklists and recording sheets are developed according to team procedures
  • 2.2 Manual instruments are prepared for data collection
  • 2.3 Electronic data acquisition system settings are checked
  • 2.4 Equipment settings, calibration and system are checked and adjusted according to task requirements and equipment manufacturer instructions
  • 2.5 Trial runs are conducted to check equipment and procedures and required adjustments are made
3. Collect data
  • 3.1 Data acquisition system start-up procedure is carried out according to manufacturer procedures
  • 3.2 Data acquisition system is operated according to its designed capacity and purpose and to manufacturer specifications and safety requirements
  • 3.3 Potential for inaccurate results arising from variables is determined
  • 3.4 Data is checked for accuracy according to manufacturer specifications
  • 3.5 Problems with required data or operation of equipment are reported to appropriate persons as required
4. Log data
  • 4.1 Selected data is imported into data analysis software according to manufacturer procedures
  • 4.2 Data is evaluated for preliminary indication of non-conformity and trends or patterns
  • 4.3 Findings from data are collated and reported to appropriate persons according to team procedures
  • 4.4 Data is stored for later retrieval according to team procedures
5. Complete work processes
  • 5.1 Final inspection is made to ensure work is to workplace expectations and data is presented ready for use
  • 5.2 Data recording equipment is checked and stored according to workplace procedures
  • 5.3 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF281 AURMTA3009 Collect and log motorsport data Unit of competency
Replaced By
State Code National Code Title Type
ODJ85 AURMTA109 Collect and log motor sport data Unit of competency
State Code National Code Title Type
BAC7 AUR30916 Certificate III in Motor Sport Technology Qualification
BAB5 AUR40316 Certificate IV in Motor Sport Technology Qualification