Unit of competency Outline

Date retreived
22/07/2026 3:23 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform basic welding, thermal cutting, heating and gouging

Perform basic welding, thermal cutting, heating and gouging

Unit of competency
National Code
AUMGTW001
State Code
WH975
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
12/12/2018
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030711 - Boilermaking And Welding
Original Release Date
11/03/2014
Nominal Hours
36
Description
This unit describes the performance outcomes required to perform basic welding, thermal cutting, heating and gouging operations.It applies to those in the automotive manufacturing industry and involves the application of skills and knowledge at a production worker level.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Identify job requirements and welding information from work instructions
  • 1.2 Identify, select and inspect welding equipment and resources
  • 1.3 Identify work health and safety (WHS) requirements according to workplace procedures
  • 1.4 Obtain materials and components of the required size, type and quantity, and inspect for compliance
  • 1.5 Plan work areas and welding according to workplace procedures
2. Perform basic welding
  • 2.1 Set up weld equipment to suit job requirements and workplace procedures
  • 2.2 Select welding methods to suit job requirements
  • 2.3 Carry out welding according to workplace standards and without causing damage to property, vehicle or components
3. Perform basic thermal cutting, heating and gouging work
  • 3.1 Set up basic thermal cutting, heating and gouging equipment to suit job requirements and workplace procedures
  • 3.2 Select basic thermal cutting, heating and gouging equipment to suit job requirements
  • 3.3 Carry out basic thermal cutting, heating and gouging according to workplace standards and without causing damage to property, vehicle or components
4. Complete work processes
  • 4.1 Check completed work against job specifications
  • 4.2 Collect and store materials that can be reused
  • 4.3 Remove waste and scrap materials according to workplace procedures
  • 4.4 Clean work area and maintain equipment
  • 4.5 Identify, tag and report faulty equipment
  • 4.6 Complete workplace documentation in line with requirements
No information
No information
Replaces
State Code National Code Title Type
WE175 AUMGTW3001 Conduct basic welding, thermal cutting, heating and gouging operations Unit of competency