Unit of competency Outline

Date retreived
22/07/2026 11:06 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply original equipment manufacturer repair procedures during vehicle repairs

Apply original equipment manufacturer repair procedures during vehicle repairs

Unit of competency
National Code
AURVTN035
State Code
AWZ62
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
15
Description
This unit describes the performance outcomes required to locate and apply original equipment manufacturer (OEM) or authorised agency’s recommended repair procedures during vehicle or component repair work. It involves preparing for the task, inspecting the vehicle damage, and identifying repair requirements according to OEM or authorised agency’s specifications, developing a repair plan, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Review OEM procedures
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 OEM or authorised agency repair procedures and vehicle specifications are identified
  • 1.3 Procedures and vehicle specifications are confirmed using OEM or authorised agency website or repair manuals
  • 1.4 Repair work is planned to minimise waste and use time efficiently
  • 1.5 OEM or authorised agency repair processes and specifications are analysed and incorporated into planning process
2. Apply knowledge of OEM standards
  • 2.1 Hazards associated with the work are identified and risks are managed
  • 2.2 Vehicle and components are located and prepared for repair work and systems or components not being worked on are protected
  • 2.3 Recommended repair materials, tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 2.4 Repair work is completed following workplace and OEM or authorised agency’s recommended repair procedures and safety and environmental requirements
  • 2.5 Identified non-compliances against OEM or authorised agency’s specifications are reported to appropriate personnel for rectification according to workplace procedures
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle or component is presented ready for painting
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, tagged and reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF517 AURVTN3035 Apply original equipment manufacturer repair procedures Unit of competency
Replaced By
State Code National Code Title Type
OCJ95 AURVTN135 Apply original equipment manufacturer repair procedures during vehicle repairs Unit of competency