Unit of competency Outline

Date retreived
22/07/2026 8:17 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate close proximity fireworks displays

Operate close proximity fireworks displays

Unit of competency
National Code
CUAPYR414
State Code
ODH54
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
16/04/2021
View on TGA
State Implementation and Classification
Approved Date
26/11/2021
Field of Education
100199 - Performing Arts, N.e.c.
Original Release Date
26/11/2021
Nominal Hours
60
Description
This unit describes the performance outcomes, skills and knowledge required to apply correct handling and safety procedures when setting up, operating and dismantling close proximity fireworks displays.The unit applies to those who work autonomously in a team environment as they take responsibility for managing risk and emergency procedures at fireworks displays, leading work teams, and communicating procedures and requirements to all persons involved in close proximity fireworks displays.Licensing and legislative requirements apply to this unit but vary according to state/territory jurisdictions. Completion of this unit does not automatically qualify a person to obtain a licence to operate in any Australian state or territory.Users are advised to check with the relevant licensing authority and work within the requirements and guidelines set down by those authorities.This unit is closely based on work completed by the Queensland Department of Natural Resources and Mines.
Notes
Elements and Performance Criteria
1. Prepare for close proximity fireworks displays
  • 1.1 Identify close proximity fireworks display requirements in consultation with required personnel
  • 1.2 Discuss issues associated with the use and operation of fireworks for displays with required personnel
  • 1.3 Establish manual and electric firing techniques for fireworks in line with current industry practices
  • 1.4 Identify fireworks material from physical features and markings
  • 1.5 Follow procedures for the transport and storage of fireworks material according to state or territory regulatory requirements
  • 1.6 Follow procedures to address health, safety and emergency services issues regarding ventilation, air quality, smoke detectors, visibility and other automated system controls
2. Set up close proximity fireworks displays
  • 2.1 Determine the composition of fireworks and their suitability for close proximity spaces
  • 2.2 Establish and manage exclusion zones and control measures for sites
  • 2.3 Implement statutory and risk managed site safety measures
  • 2.4 Supervise the set-up of equipment and fireworks according to safety management systems
  • 2.5 Monitor internal environmental factors to ensure safety
3. Operate fireworks
  • 3.1 Commence immediate pre-display activities relating to health and safety according to state or territory regulatory requirements
  • 3.2 Initiative fireworks in line with current industry practices and safety standards
  • 3.3 Maintain control of displays through monitoring and supervision of others as required
  • 3.4 Identify problems and take action as required
  • 3.5 Supervise operations in ways that foster cohesion in the work team
4. Finalise work operations
  • 4.1 Clean up and return venues to owners in original condition
  • 4.2 Complete other post-display activities and documentation as required
  • 4.3 Evaluate effectiveness of operations and safety measures and note areas for improvement n consultation with required personnel
No information
No information
Replaces
State Code National Code Title Type
WI177 CUAPYR404 Operate close proximity fireworks displays Unit of competency