Unit of competency Outline

Date retreived
22/07/2026 8:15 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Collect samples for a rural production or horticulture monitoring program

Collect samples for a rural production or horticulture monitoring program

Unit of competency
National Code
AHCWRK301
State Code
BAN59
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
019909 - Laboratory Technology
Original Release Date
12/01/2017
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to collect samples as part of a rural production or horticulture monitoring program or while conducting post-mortem examination of livestock or other animals.Samples collected will usually be analysed by laboratory staff, although collection staff may undertake some testing.This unit applies to individuals who work under broad direction and take responsibility for their own work. They use discretion and judgement in the selection and use of available resources.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan for collection of samples
  • 1.1 Confirm the purpose and scope of sample collection activity from discussion with supervisor or work instructions
  • 1.2 Confirm the sample collection schedule with supervisor
  • 1.3 Confirm the sampling site location and gain approval for site access where required
  • 1.4 Identify the samples to be collected and preserved with supervisor
  • 1.5 Assess the range of likely operating conditions, hazards and difficult or sensitive environments for impact on sampling and testing
2. Prepare equipment and resources
  • 2.1 Source equipment required for sampling and preserving as outlined in sampling procedures
  • 2.2 Check equipment for availability and serviceability
  • 2.3 Select and use appropriate personal protective equipment
  • 2.4 Collect data or record sheets or books for use
  • 2.5 Move equipment, data sheets and personnel to sampling sites and prepare for use
  • 2.6 Apply safe work practices at all times
3. Carry out sampling and preserving procedures
  • 3.1 Collect samples as outlined in sampling plan
  • 3.2 Preserve and record samples
  • 3.3 Prepare and package samples for external analysis in line with laboratory standards and send to laboratory
  • 3.4 Package and transport hazardous materials appropriately
  • 3.5 Make observations including information on the surrounding area and environmental conditions
  • 3.6 Report and deliver collection outcomes including presentation of samples
4. Complete sample collection activities
  • 4.1 Clean, sanitise and store equipment and clothing
  • 4.2 Repair damaged or malfunctioning equipment on site or sent to manufacturer or specialist
  • 4.3 Record sampling results and observations on data sheets and forward to appropriate person
  • 4.4 Advise supervisor of changes in field conditions and equipment
No information
No information
Replaces
State Code National Code Title Type
D7308 AHCWRK301A Collect samples for a rural production or horticulture monitoring program Unit of competency
Replaced By
State Code National Code Title Type
OFB73 AHCWRK313 Collect samples for a rural production or horticulture monitoring program Unit of competency