Unit of competency Outline

Date retreived
22/07/2026 10:15 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use rigging practices and systems on telecommunications network structures

Use rigging practices and systems on telecommunications network structures

Unit of competency
National Code
ICTTCR201
State Code
AWD69
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
040329 - Scaffolding And Rigging
Original Release Date
05/07/2016
Nominal Hours
40
Description
This unit describes the skills and knowledge required to perform rigging work during system installations for telecommunications radio structures.It applies to individuals who are usually highly skilled verbal and non-verbal communicators working in a team environment. They must be appropriately licensed to complete high risk work and be able to safely use all required equipment.Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. Refer to the ICT Implementation Guide Companion Volume or the relevant regulator for details of licensing, legislative or certification requirements.
Notes
Elements and Performance Criteria
1. Prepare rigging systems
  • 1.1 Prepare for work according to relevant legislation, codes, regulations and standards
  • 1.2 Arrange access to site and confirm client requirements
  • 1.3 Inform appropriate personnel of existing and potential site hazards
  • 1.4 Select tools and safety equipment required for safe rigging practice
  • 1.5 Use rigging systems in telecommunications environment according to specifications
  • 1.6 Identify proposed position of equipment to be mounted on telecommunications radio structures according to specifications and industry practice
  • 1.7 Estimate safe working loads for rigging systems and equipment according to specifications
  • 1.8 Select and inspect rigging equipment to ensure it is fit for purpose according to specifications
2. Set up and carry out rigging work on telecommunications radio structures
  • 2.1 Set up rigging and dogging equipment following safe working practices and procedures according to all relevant work health and safety (WHS) legislation
  • 2.2 Operate rigging equipment and install telecommunications antenna and associated equipment according to specifications
  • 2.3 Use internationally recognised communication signals and protocols with crane drivers and helicopter crews according to the Crane Association Crane Safety Manual for Operators/Users
3. De-rig and complete documentation
  • 3.1 De-rig and lower rigging equipment according to specifications
  • 3.2 Restore site to client expectations following completion of installation according to industry practice
  • 3.3 Complete documentation and notify client for sign off
No information
No information
Replaces
State Code National Code Title Type
D3430 ICTTCR2188A Use rigging practices and systems on telecommunications network structures Unit of competency