Unit of competency Outline

Date retreived
23/07/2026 3:29 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce complex laminated product

Produce complex laminated product

Unit of competency
National Code
ICPCBF382
State Code
AUO56
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
50
Description
This unit describes the skills and knowledge required to produce complex laminated product, to monitor and adjust machinery, maintain transportation of the substrate, identify and rectify faults, and correctly clean and shut down equipment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Maintain operation of reel transportation system on web-fed machine
  • 1.1 Reel stand is monitored and adjusted to ensure efficient continuous operation
  • 1.2 Web control system is monitored and adjusted to ensure correct tension and accurate continuous positioning of the web for efficient operation
  • 1.3 Substrate is added to the process according to job specifications
2. Maintain operation of reel delivery system on web-fed machine
  • 2.1 Reel rewind section is monitored and adjusted to maintain correct tension and to ensure no marks, blemishes or damage to finished product
  • 2.2 Substrate is removed from the process according to job specifications
  • 2.3 Sheeting section is monitored and adjusted to ensure quality and efficient product delivery
3. Maintain complex laminating process
  • 3.1 Registration of laminating is monitored and adjusted to ensure product quality meets the approved sample standard
  • 3.2 Pressures are monitored and adjusted to ensure product quality meets the approved sample standard
  • 3.3 Adhesion is monitored and adjusted to ensure product quality meets the approved sample standard
4. Maintain production processes
  • 4.1 In-line printing/coating/converting/binding/finishing process(es) are monitored and adjusted to ensure product quality meets the approved sample standard
  • 4.2 Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule
  • 4.3 Production is maintained according to work health and safety (WHS) requirements, manufacturer’s specifications and enterprise procedures
  • 4.4 Manual and/or automatic control is used according to job specifications
  • 4.5 Performance is monitored and verified using the process control system according to enterprise procedures
  • 4.6 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention
  • 4.7 Process adjustments to eliminate problems are reported according to enterprise procedures
  • 4.8 Faulty performance of equipment is identified and reported according to enterprise procedures
  • 4.9 Waste is sorted according to enterprise procedures
5. Identify and rectify machine operating problem
  • 5.1 Problems in laminating machine are identified and reported according to enterprise procedures
  • 5.2 Adjustments or corrections are carried out according to specified procedures, and are consistent with operator’s skill level
  • 5.3 Laminating machine operation is checked to ensure correct operation
6. Conduct shutdown of production process
  • 6.1 Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures
  • 6.2 Shutdown is conducted in association with fellow workers and in compliance with WHS requirements
  • 6.3 Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures
  • 6.4 Machine faults requiring repair are identified and reported to designated person according to enterprise procedures
  • 6.5 Repair/adjustment is verified prior to resumption of operations
7. Clean laminating machine at end of run
  • 7.1 Laminating machine is disengaged and cleaned ready for next run
  • 7.2 Adhesive system is washed ready for next run and liquid waste is disposed of according to regulatory requirements and enterprise procedures
  • 7.3 In-line printing/coating/converting/binding/finishing units are cleaned ready for next run
  • 7.4 Reel feed, transportation and delivery systems are disengaged and cleaned ready for next run
  • 7.5 Production records or other documentation are accurately completed where required by enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
D3066 ICPCF382C Produce complex laminated product Unit of competency
Replaced By
State Code National Code Title Type
OBP63 ICPCBF3820 Produce complex laminated product Unit of competency