Unit of competency Outline

Date retreived
22/07/2026 4:27 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up single-faced web

Set up single-faced web

Unit of competency
National Code
ICPCBF214
State Code
AUP33
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
20
Description
This unit describes the skills and knowledge required to set up a single-faced web for corrugated board manufacture involving the reel in-feed, splicer, pre-conditioner, pre-heater, single facer, curing, coating and/or waxing sections of a corrugator.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for set up
  • 1.1 Job specifications are read and interpreted from job documentation or process control system
  • 1.2 Set-up is carried out correctly and in minimum time
  • 1.3 Paper/board quantity requirements are estimated, ordered and checked
2. Set up reel transportation system
  • 2.1 Unwind reel is set up and adjusted according to job specifications
  • 2.2 Webbing procedures are carried out according to machinery requirements
  • 2.3 Web control system is set up and adjusted according to job specifications
  • 2.4 Reels are spliced/joined according to job specifications
3. Set up machine for single facing
  • 3.1 Steam delivery system is set up and adjusted to suit corrugating process and according to job specifications
  • 3.2 Corrugating rolls and pressure roll are set to correct pressure
  • 3.3.Starch delivery system is set up and adjusted to suit corrugating process, and according to job specifications
  • 3.4 Heat delivery system is set up and adjusted to suit corrugating process, and according to job specifications
4. Set up in-line units
  • 4.1 Wax units are set up and adjusted to suit corrugating process, and according to job specifications
  • 4.2 Coating units are set up and adjusted to suit corrugating process, and according to job specifications
  • 4.3 Slitters are set up and adjusted according to job specifications
  • 4.4 Cut-off knife is set up and adjusted according to job specifications
5. Inspect and adjust quality
  • 5.1 Inspection and/or testing of sample is organised
  • 5.2 Sample is visually inspected and/or tested according to enterprise procedures
  • 5.3 Results are interpreted to determine adjustment requirements
  • 5.4 Adjustment changes are carried out according to product and machine specifications
No information
No information
Replaces
State Code National Code Title Type
D3013 ICPCF2104C Set up single-faced web Unit of competency
Replaced By
State Code National Code Title Type
OBP26 ICPCBF2140 Set up single-faced web Unit of competency
State Code National Code Title Type
AWB3 ICP20115 Certificate II in Printing and Graphic Arts (General) Qualification